|
Stop sacrificing your profit margin to "shelling" and transit damage. |
In the world of Insulated Glass Units (IGU) and architectural glazing, storage density is currency. Traditional A-frames are stable, but they eat up floor space and are a nightmare to ship back empty. Wood crates are a liability—nails scratch Low-E coatings, and disposal fees add up.
The industry is shifting towards the Forkliftable L-racks with safety guides (Grack). Unlike static storage, these racks are designed as a dynamic logistical tool. They allow you to store heavy packs of float glass against the wall to clear aisle space, and then immediately forklift them onto a flatbed for jobsite delivery.
L-Racks placed back-to-back or against walls maximize your fabrication plant's floor space.
The most common cause of spontaneous breakage during transport isn't the bump in the road; it's the rack itself. Cheap racks use glued-on rubber pads. Under the 3,000 lbs load of a Jumbo Sheet, the glass edge acts like a knife, slicing through soft rubber and making contact with the steel frame. This metal-on-glass contact creates micro-fractures that lead to shattering.
Our solution is the Steel-Core Rubber Profile. We don't use glue. The rubber is reinforced with an internal steel plate and mechanically fastened to the Q235 steel frame with self-tapping screws. This ensures the protective layer never shifts, peels, or compresses to failure, protecting your high-value Laminated Glass and Custom Shower Enclosures.
Mechanically fastened steel-core rubber profiles prevent metal-to-glass contact, critical for IGU integrity.
If you are delivering to Construction Sites or other states, the cost of returning empty racks can kill your margins. Standard A-frames ship air on the way back.
The L-shape design features a unique "Nesting" capability. Similar to shopping carts, empty racks slide into one another. You can fit up to 7 empty racks in the space of 2. This means a single truck can return hundreds of racks, slashing your reverse logistics costs and making the Forkliftable L-racks with safety guides a true asset for Glass Distributors.
Nesting empty racks reduces storage footprint and return shipping costs significantly.
Whether moving Granite Slabs or Window Units, stability is non-negotiable. These racks are built with full-seam welded Q235 steel (never spot welded) to withstand the rigors of forklift handling and crane lifting.
Features include:
Reinforced forklift channels and 4-way entry ensure safe handling in busy warehouses.
Q: Can these racks handle 1/4 inch tempered glass without bowing?
A: Absolutely. The 90° vertical uprights combined with a calculated 3-5° tilt ensure that even thinner 1/4 inch sheets are fully supported against the backboard, preventing bowing or stress cracks.
Q: What is the weight capacity for a standard L-Rack?
A: Our standard heavy-duty models are rated for 3,300 lbs (1.5 Tons) to 8,800 lbs (4 Tons), making them suitable for dense packs of float glass or heavy granite slabs.
Q: We store racks outdoors. Will they rust and stain the glass?
A: For outdoor storage, we recommend our Hot-Dip Galvanized finish. This provides 10-20 years of corrosion resistance, ensuring no rust water ever drips onto your valuable glass inventory.
Q: Can I mix different sizes of glass on one rack?
A: Yes, but always follow the "pyramid rule": place the largest sheets against the back and smaller sheets (like shower doors) in front. Use our ratchet strap system to secure the load tightly.
Q: How many empty racks fit in a standard shipping container?
A: Thanks to the nesting design, a 40HQ container can hold approximately 98 to 112 empty units, drastically reducing your procurement freight costs.
