L-Shape Glass Storage Rack: Technical Solution for 4×8 ft Panel Storage
Grack
Technical solution for a 2,400×750×1,200 mm L-shape glass storage rack rated 1,000 kg per unit, built for 4x8 ft panels with 600 mm single-side storage width.
L-Shape Glass Storage Rack: Technical Solution for 4×8 ft Panel Storage
A 2,400 × 750 × 1,200 mm L-shape glass storage rack rated at 1,000 kg per unit, configured for 4×8 ft panels with 600 mm single-side storage width, adjustable forklift channel spacing and rope rings for secure handling.

Customer Requirement Analysis:
Customer background:
The customer is already familiar with the Grack rack and will use it for storing panels.
Panel size: 4×8 ft. Maximum rack load: 1,000 kg.
Rubber strips are not required.
The dimensions requested by the customer during the Grack meeting are shown in the figure below:

Technical Solution Description
Parameter table
| External dimensions (mm) | 2400×750×1200 |
|---|---|
| Usable storage width (mm) | 600 |
| Load capacity per unit (kg) | 1000 |
| Unit weight (kg) | 112 |

Single-side storage width.

Forklift channel centre distance (adjustable)

Panels are stored vertically. If panel sizes differ, pay attention to placing the larger panels at the rear and the smaller panels at the front (schematic).

The inner side of the rack has a 90° included angle so that it fits the glass better, and the glass sits at a certain tilt angle to the horizontal plane to prevent the panels from tipping over (schematic).

The rack is fitted with rope rings so that panels can be tied down and stay more secure during movement (schematic).

Partial display of previous products (shown for style reference only; the surface finish in this picture is powder coating).


After stacking as a whole, the racks are packed with stretch film plus packing straps (as shown below). This method incurs no additional packaging cost, but it cannot fully ensure against slight local damage to the paint film caused by contact between products during transport. Such damage does not affect the function of use and only slightly affects the local appearance of the product. A more reliable packaging option (such as wooden crates) can also be selected; wooden crates are costed into the product cost entirely according to our purchase price, but note that they reduce the number of units loaded per truck, and the crate cost must be calculated after the ordered quantity is confirmed.


Finally, thank you for reading this far. With regard to the product information above, please consider whether it can meet your operating requirements; if you have any questions, we can communicate in another meeting.
Whether the free packaging method we provide is acceptable.
Whether the rack dimensions above need to be adjusted.
Whether you have any other questions and requirements. We will do our best to meet your needs and look forward to our next communication with you.
Send us your panel sizes, the payload you need per rack and how the racks will be handled and shipped, and we will confirm the final rack dimensions, packaging method and loading plan for your project. Contact us