🏭 Steelpallet · Rechtstreeks van de Fabriek · OEM Mogelijk

L-Shape Glass Storage Rack: Technical Solution for 4×8 ft Panel Storage
Grack

Technical solution for a 2,400×750×1,200 mm L-shape glass storage rack rated 1,000 kg per unit, built for 4x8 ft panels with 600 mm single-side storage width.

100%
Staalkwaliteit
Zwaar
Draagvermogen Classificatie
Aangepaste
Maten Gebouwd
L-Shape Glass Storage Rack: Technical Solution for 4×8 ft Panel Storage
Technical Solution

L-Shape Glass Storage Rack: Technical Solution for 4×8 ft Panel Storage

A 2,400 × 750 × 1,200 mm L-shape glass storage rack rated at 1,000 kg per unit, configured for 4×8 ft panels with 600 mm single-side storage width, adjustable forklift channel spacing and rope rings for secure handling.

Review the solution

Customer-requested dimensions sketch for the Grack glass storage rack

Customer Requirement Analysis:

Customer background:

The customer is already familiar with the Grack rack and will use it for storing panels.

Panel size: 4×8 ft. Maximum rack load: 1,000 kg.

Rubber strips are not required.

The dimensions requested by the customer during the Grack meeting are shown in the figure below:

Customer-requested dimensions sketch for the Grack glass storage rack

Technical Solution Description

Parameter table

External dimensions (mm) 2400×750×1200
Usable storage width (mm) 600
Load capacity per unit (kg) 1000
Unit weight (kg) 112
Grack glass storage rack overall dimension drawing

Single-side storage width.

Single-side glass storage width of the Grack rack

Forklift channel centre distance (adjustable)

Adjustable forklift channel center distance on the Grack rack

Panels are stored vertically. If panel sizes differ, pay attention to placing the larger panels at the rear and the smaller panels at the front (schematic).

Vertical glass sheet storage with larger sheets at the rear and smaller sheets in front

The inner side of the rack has a 90° included angle so that it fits the glass better, and the glass sits at a certain tilt angle to the horizontal plane to prevent the panels from tipping over (schematic).

90-degree internal angle and tilted glass support on the Grack rack

The rack is fitted with rope rings so that panels can be tied down and stay more secure during movement (schematic).

Rope tying rings for securing glass sheets on the Grack rack

Partial display of previous products (shown for style reference only; the surface finish in this picture is powder coating).

Powder-coated Grack glass storage rack from previous production
Powder-coated Grack glass storage rack structure from previous production

After stacking as a whole, the racks are packed with stretch film plus packing straps (as shown below). This method incurs no additional packaging cost, but it cannot fully ensure against slight local damage to the paint film caused by contact between products during transport. Such damage does not affect the function of use and only slightly affects the local appearance of the product. A more reliable packaging option (such as wooden crates) can also be selected; wooden crates are costed into the product cost entirely according to our purchase price, but note that they reduce the number of units loaded per truck, and the crate cost must be calculated after the ordered quantity is confirmed.

Stacked Grack racks wrapped with stretch film and packing straps
Stretch film and strapping packaging of stacked Grack racks

Finally, thank you for reading this far. With regard to the product information above, please consider whether it can meet your operating requirements; if you have any questions, we can communicate in another meeting.

Whether the free packaging method we provide is acceptable.

Whether the rack dimensions above need to be adjusted.

Whether you have any other questions and requirements. We will do our best to meet your needs and look forward to our next communication with you.

Send us your panel sizes, the payload you need per rack and how the racks will be handled and shipped, and we will confirm the final rack dimensions, packaging method and loading plan for your project. Contact us

Vraag Prijsdetails aan




    Offerteaanvraaglijst

    Uw offerteaanvraaglijst is leeg.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.