Stackable Nestainer Rack: Technical Solution for a Custom Structural Variant with Open-Top Stacking and Empty-Rack Nesting
strack
Technical solution for a custom nestainer stackable rack built to drawing: 1400×1200×1500 mm internal, 1000 kg per pallet, two-level stacking, 90 mm fork clearance, empty-rack nesting.
Stackable Nestainer Rack: Technical Solution for a Custom Structural Variant with Open-Top Stacking and Empty-Rack Nesting
This document sets out the design and build of a variant nestainer rack produced strictly to the customer's drawing: electrostatic powder-coated steel, 1,400 mm internal width, 1,200 mm internal depth and 1,500 mm internal height, 1,000 kg load per pallet, two-level loaded stacking, an 85 kg dead weight, Q235 50×2 mm rectangular tube with 50×4 mm track angle steel, 90 mm front fork-entry clearance, and nested empty-rack shipping at five units per stack.

Customer Requirement Analysis:
The customer requires a variant structure of the upright nestainer rack, as shown in the attached drawing below.
Manufacture strictly according to the drawing structure, with a powder-coated surface, and 1,000 kg load per pallet.

Parameter Table
| No. | Artículo | Parameter Value | Observaciones |
|---|---|---|---|
| 1 | Internal width | 1400mm | |
| 2 | Internal depth | 1200mm | |
| 3 | Internal height | 1500mm | |
| 4 | Load per pallet | 1000kg | |
| 5 | Stacking levels | 2 levels | |
| 6 | Tratamiento de superficie | Electrostatic powder coating |
Technical Solution Description
The picture below shows the nestainer rack we discussed together in the meeting. We reproduced it according to the requirements in the drawing, and next let me show you the specific parameters and details of this panel rack.

This nestainer rack is a fully welded structure, so the structure is comparatively stable. The dimensions are designed according to your requirements. The top is the first open stacking structure, and the racks themselves can also nest into one another, saving the space occupied when the nestainer racks are idle.

This is the material usage of the nestainer rack: the main material is basically 50×2 rectangular tube of material Q235, the track angle steel is 50×4, and the dead weight of the nestainer rack is 85 kg.

The front fork-entry height clearance of the nestainer rack is 90 mm (140-50), which meets the fork-entry requirements of forklifts and pallet trucks.

Effect of the nestainer rack after loading.

After loading, the racks can be stacked; this is the effect of two-level stacking.

When empty, they can also be nested and stacked like this, saving the space occupied by the nestainer racks. This is the overall dimension after stacking five units, which can be used as the packing dimension for shipment.
Productos Similares




Packing and Loading Plan
Packing reference style:


The product is packed with stretch film plus strapping band. This method does not generate extra packing costs, but it cannot fully guarantee that the surface paint film will not be damaged by collisions between products during transport. A more reliable wooden crate packing is also available, and the wooden crate is fully calculated into the product cost at our purchase price. (Wooden crate price = 90 RMB/㎡)
Items for Further Discussion
We have prepared a preliminary interpretation of the solution for you. If you need to know more about this nestainer rack, we can hold an online meeting to discuss their functions together and see whether further adjustment is needed. We look forward to studying this together with you.
Share your drawing or load case and we will review the internal dimensions, fork-entry clearance, material specification and stacking levels against your handling and storage conditions, then confirm packing and loading for shipment. Start a technical review