🏭 Steelpallet · Directo de Fábrica · OEM Disponible

TTRACK vs. DERACK for Tire Storage: Long-Term Protection or Fast Retrieval?

Technical comparison of the TTRACK folding tire rack and the DERACK plug-in tire rack: upright vs. flat-layer tire storage, whole-layer retrieval, assembly differences, space use and cost, with a selection guide for long-term storage and short-term staging.

100%
Calidad del Acero
Pesado
Clasificación de Carga
Personalizado
Tamaños Construidos
TTRACK vs. DERACK for Tire Storage: Long-Term Protection or Fast Retrieval?
Technical Solution | DERACK

TTRACK vs. DERACK for Tire Storage: Long-Term Protection or Fast Retrieval?

A structural comparison of two steel tire-storage racks for warehouse and CFS operations: how the folding TTRACK frame supports upright and cross-stacked tires for long-term storage, how the DERACK base-and-four-uprights system holds four flat tires per shelf for whole-layer retrieval, and which operating factors actually decide the selection.

Send us your tire storage plan and retrieval method

derack technical source image

TTRACK vs. DERACK for Tire Storage: Long-Term Protection or Fast Retrieval?

Two CFS products can be used to store the same material: tires.

Although their structures, assembly methods and handling characteristics differ, the most important distinction is straightforward:

TTRACK stores tires upright or in a cross-stacked arrangement, making it more suitable for long-term storage and reducing the risk of tire deformation.

DERACK stores tires horizontally in defined layers, making complete groups of four tires easier to retrieve during short-term staging and frequent turnover.

The choice therefore depends less on the rack’s nominal capacity or purchase price than on two operating questions:

How long will the tires remain in storage?

How will they be retrieved and handled?

TTRACK protects the tire over the long term. DERACK makes the tire easier to move over the short term.

derack technical source image

[Image: Approved photograph of the TTRACK folding tire rack.]

1. TTRACK and DERACK at a Glance

Factor de Comparación TTRACK DERACK
Product type Folding and collapsible tire rack Plug-in tire rack with a base and four uprights
Primary application Long-term tire storage Short-term staging, temporary stacking and frequent retrieval
Tire arrangement Upright or cross-stacked Four tires laid flat on each shelf, with shelves stacked upward
Frame construction Folding support frame delivered as one overall assembly Base with four separately inserted uprights
Assembly method Open the folding frame and install the pull rods Insert the four uprights into their respective positions one at a time
Storage of removable components Pull rods are stored inside the rack Uprights must be stored separately when the rack is not in use
Risk of missing components Reduced because the folding structure is retained as one unit Each of the four uprights must be identified and accounted for
Maximum storage height Approximately five levels in the arrangement discussed Approximately five levels in the arrangement discussed
Uso del espacio Comparable to DERACK Comparable to TTRACK
Manufacturing cost Slightly higher because the structure is more complex Slightly lower, although the difference is relatively small
Support for tire orientation Side supports allow tires to remain upright or cross-stacked No side guardrail; tires must be laid flat
Retrieval unit Individual tires can be removed directly A complete layer of four tires can be removed together
Operating preference Tires that must remain in storage for an extended period Tires moved frequently or collected as complete layers
Duration guidance in the video More than approximately one month Short-term turnover or temporary storage

The approximately five-level capacity and one-month threshold are the operating references given in the presentation. They should be confirmed against the current product documentation for each specific configuration.

derack technical source image

2. The Core Difference Is the Tire Storage Method

Both products can accommodate tires, but the way they support the tires is fundamentally different.

2.1 TTRACK: Upright or Cross-Stacked

The TTRACK uses a folding frame fitted with pull rods. These rods create the side support that allows the tires to be stored in either of two arrangements:

Upright storage: the tires stand vertically;

Cross-stacked storage: the tires are arranged in alternating directions within the rack.

Because the tires are supported by the rack rather than lying unsupported in a loose pile, the frame helps maintain their position.

2.2 DERACK: Flat Layers of Four Tires

DERACK uses a base and four plug-in uprights to create a series of shelf levels.

In the tire-storage application shown in the presentation, the tires are laid horizontally, with four tires forming each layer. The shelves are then stacked upward from the base.

The resulting arrangement allows a complete group of four tires to be removed as one layer.

Storage Aspect TTRACK DERACK
Basic tire geometry Upright or cross-stacked Flat, in groups of four
Structural feature enabling the arrangement Pull rods and side support Horizontal shelf levels
Method of building up storage volume Within the folding frame By adding shelf levels upward from the base
Primary handling unit An individual tire A complete layer of four tires
Main operating advantage Reduced deformation risk during extended storage Fast and convenient whole-layer retrieval
Main limitation Less convenient when the complete layer must be removed together Not suitable for the upright or cross-stacked method shown for TTRACK

The storage arrangement is not merely an operator preference. It is determined by the structure of the rack.

derack technical source image

3. TTRACK: A Folding Rack for Long-Term Storage

TTRACK is a folding tire rack designed around two requirements:

the rack should remain complete and easy to transport;

the tires should be stored in a way that helps preserve their shape over an extended period.

3.1 The Folding Frame

The TTRACK’s folding frame is retained as one overall assembly.

This gives it a practical advantage over a rack that must be dismantled into several separate structural components.

TTRACK Structural Feature Operating Benefit
Folding frame retained as one unit Fewer separate components to track during transport and storage
Pull rods stored inside the rack The removable components remain with the main structure
Simple folding and rod-installation operation Faster and simpler to erect
Upright and cross-stacked configurations Supports two arrangements suited to long-term tire storage
Compact state when folded Easier to transport and store when not in use

3.2 Four Pull Rods and Optional Additional Rods

The standard arrangement shown in the presentation uses four pull rods. The presenter also indicated that two additional rods can be configured where required.

These rods do more than divide the rack into storage positions. Their side support creates the geometry needed for the tires to stand upright or be cross-stacked.

Pull-Rod Arrangement Función
Four main pull rods Form the basic supporting structure for the tire-storage modes shown
Optional two additional rods Permit adaptation where an extended or additional support arrangement is required
Rod storage within the rack Keeps the removable parts with the folding structure
Rod installation Open the frame and hang or attach the rods into their working positions

The exact number and arrangement of rods must be confirmed against the released drawing for the selected configuration.

3.3 Upright Storage

Upright storage places the tires vertically within the rack.

According to the presentation, this method is particularly suitable for long-term storage because it reduces the likelihood that the tire will remain deformed under the weight of other tires.

For customers storing tires that must retain their original condition, this is the strongest argument for selecting TTRACK.

3.4 Cross-Stacked Storage

The cross-stacked method places tires in alternating directions.

The frame and pull rods prevent the tires from simply spreading or rolling away, while the alternating arrangement creates a stable storage pattern.

According to the presentation, both TTRACK arrangements are associated with long-term storage and reduced deformation risk:

TTRACK Storage Mode Main Advantage Best-Fit Use
500-3000 KG Helps preserve the tire’s shape during extended storage Long-term storage of tires that must remain in saleable condition
Cross-stacked Maintains a stable stack while retaining direct access to individual tires Long-term storage with occasional individual retrieval
Folded and empty Compact transport and storage state Transfer, storage and rapid redeployment

The relationship between storage orientation and tire deformation is presented as an application advantage. Actual tire-condition requirements should still be confirmed against the tire manufacturer’s storage recommendations.

derack technical source image

4. DERACK: Layer-Based Storage for Fast Retrieval

DERACK can also be used as a tire-storage system, but its structure supports a different operating method.

4.1 Base and Four Uprights

The DERACK consists of a base and four plug-in uprights. In the tire-storage version shown, the uprights have a distinctive profile:

a flared or bell-shaped top;

and a pointed bottom.

Once the four uprights have been inserted, the shelf levels create the storage volume.

4.2 Why Tires Cannot Be Stored Upright

Unlike the TTRACK, the DERACK arrangement shown does not have the side guardrail or pull-rod support needed to keep a tire standing on edge.

As a result, the tires cannot be stored upright or cross-stacked in the same manner as the TTRACK. They must be laid flat on the horizontal shelf levels.

This is a structural limitation rather than an operator preference.

4.3 Four Tires per Layer

In the arrangement demonstrated, each shelf carries four tires laid flat. Additional shelf levels are stacked upward from the base.

This creates a clearly defined layer that can be retrieved as one group.

DERACK Feature Operating Result
Four tires laid flat per shelf Creates a repeatable layer arrangement
Shelves stacked upward Builds storage capacity vertically from the base
Complete layer of four tires Can be removed as one handling unit
Equipment handling whole layers The arrangement is directly compatible with layer-based collection
No side guardrail Tires cannot be stored upright or cross-stacked
Separate upright components Uprights must be inserted, removed and stored individually

4.4 Why Flat-Layer Storage Is Useful for Short-Term Handling

The main benefit of DERACK is convenient retrieval.

If associated equipment expects to collect a complete group of tires, a removable layer of four tires can be handled directly. The operator does not need to remove the tires individually and rebuild the group.

This makes the system especially useful for:

temporary tire staging;

short-term accumulation;

frequent collection and transfer;

whole-layer mechanical handling;

and production areas where tires move regularly.

When movement speed is the priority, the best arrangement is the one that matches the handling unit used on site.

derack technical source image

5. Assembly and Component Management

Although storage method is the decisive selection factor, the two products also differ significantly in how they are assembled.

5.1 TTRACK: One Complete Unit with the Rods Stored Inside

The TTRACK folding structure is retained as one overall assembly. Its pull rods are stored within a dedicated space in the rack and can be removed directly when the rack is being erected.

TTRACK Assembly Characteristic Practical Benefit
Folding frame handled as one unit Reduced risk of structural components being separated
Pull rods stored inside the rack Removable parts remain with the product
Assembly by opening the frame and installing the rods Simple operation without inserting every upright individually
Compact folded state Easier transportation and temporary storage
Repeatable assembly The same rack can be erected whenever the application requires

The folding design simplifies ownership of the product: the operator does not need to maintain a separate inventory of four loose uprights.

5.2 DERACK: Four Uprights Inserted Individually

DERACK requires the four uprights to be inserted into the base one at a time.

DERACK Assembly Characteristic Practical Consideration
Four separate uprights Each upright must be present, identified and correctly oriented
Individual insertion More assembly steps than the TTRACK folding arrangement
Separate component storage Removed uprights require an organized storage location
Misplacement risk A missing upright interrupts assembly
Modular benefit The rack can be partially dismantled, adjusted or moved as required
Application-specific profile The flared top and pointed bottom are tailored to the tire-storage arrangement

The trade-off is clear:

TTRACK prioritizes simplicity and self-contained component storage.

DERACK provides the modularity and layered structure needed for efficient whole-layer handling.

derack technical source image

6. Space Utilization and Manufacturing Cost

The presentation emphasizes that the two systems are relatively close in both space utilization and manufacturing cost. These factors therefore do not normally determine the final selection.

6.1 Comparable Storage Levels

The presenter indicates that both systems can provide approximately five levels in the configurations discussed.

Métrica TTRACK DERACK
Maximum storage levels Approximately five Approximately five
General space utilization Comparable Comparable
Footprint for the same quantity Governed by frame dimensions and level count Governed by base dimensions and level count
Main space difference Created by the operating method rather than a major difference in rack density Created by the operating method rather than a major difference in rack density

Actual storage capacity also depends on tire dimensions, the selected configuration, the number of units installed and the available building height.

6.2 Only a Modest Cost Difference

TTRACK is structurally more complex and may therefore cost slightly more to manufacture. However, the presenter states that the difference remains within a relatively narrow range.

Factor de Costo TTRACK DERACK
Structural complexity Mayor Menor
Relative manufacturing cost Slightly higher Slightly lower
Difference in total cost Moderada Moderada
Effect on product selection Secondary Secondary

Choosing on purchase price alone would overlook the more important operational difference: whether the customer needs long-term tire protection or rapid layer-based retrieval.

6.3 What Really Determines the Selection

Factor de decisión Decisive? Reason
Uso del espacio No The products are broadly comparable
Manufacturing cost No The cost difference is relatively small
Assembly method Partly Important to the operating team, but secondary
Tire storage orientation Yes Determines how the tire is supported and handled
Storage duration Yes Determines whether deformation protection or rapid turnover is the priority
Handling unit Yes Individual retrieval and whole-layer retrieval require different arrangements

Once space and cost have been considered, the decision becomes simple: how long will the tires stay here, and how will they be moved while they are here?

derack technical source image

7. Long-Term Storage vs. Short-Term Staging

7.1 Long-Term Storage: Select TTRACK

TTRACK is the preferred option when the tires will remain in storage for an extended period and their physical condition is important.

Long-Term Storage Requirement Why TTRACK Is Better Suited
Minimize deformation during storage Upright and cross-stacked arrangements are specifically presented as deformation-control methods
Store tires that must remain saleable Keeping the tire in its original shape is more important than removing complete four-tire layers
Reduce long-term pressure between stacked tires The vertical or cross-stacked method avoids the continuous flat-layer arrangement used by DERACK
Retain direct access to individual tires The operator can remove a specific tire without dismantling an entire shelf layer
Store in a compact, controlled structure The folding frame and pull rods support the tires in defined positions

The presentation uses more than approximately one month as an operating indication for long-term storage. This should be treated as guidance rather than a universal expiry point because tire composition, dimensions, environmental conditions and manufacturer recommendations can affect the appropriate storage duration.

derack technical source image

7.2 Short-Term Staging: Select DERACK

DERACK is the preferred option when the tires are expected to move frequently and are stored only temporarily.

Short-Term Operating Requirement Why DERACK Is Better Suited
Fast whole-layer retrieval Four tires form a clearly defined removable layer
Collection by associated equipment Layer-based handling is directly compatible with equipment that removes complete groups
Temporary accumulation between production steps The system is designed for frequent in-and-out movement
Repeated stacking and transfer A complete shelf layer can be handled without individually rebuilding a group of tires
Short storage duration Long-term deformation protection is less critical than movement efficiency

The practical distinction is therefore:

TTRACK stores the tire as the primary object to be protected. DERACK stores the tire as part of a movable four-tire layer.

8. A Practical Selection Guide

Customer Situation Recommended Product Recommended Storage Method Reason
Tires stored for more than approximately one month TTRACK Upright or cross-stacked Reduces deformation risk during extended storage
Tires must remain in saleable condition TTRACK 500-3000 KG Prioritizes preservation of the tire’s shape
Long-term storage with occasional individual access TTRACK Cross-stacked Stable storage with direct individual retrieval
Short-term turnover DERACK Flat, four tires per shelf Faster whole-layer retrieval
Tires collected by equipment in groups DERACK Flat, four tires per shelf Directly compatible with layer-based handling
Temporary staging between production steps DERACK Flat, four tires per shelf Supports frequent in-and-out movement
Customer wants one self-contained unit TTRACK Upright or cross-stacked Folding frame and pull rods remain together
Customer values modular adjustment DERACK Flat, four tires per shelf Uprights and shelf levels can be configured as required
Approximately five levels are required Either Depends on duration and handling Both provide broadly comparable space utilization
Both long-term protection and complete-layer retrieval are essential Review the operating priorities Define the dominant requirement before selecting One product cannot optimize both objectives equally

8.1 A Three-Question Selection Method

Question 1: How Long Will the Tires Remain in Storage?

More than approximately one month, or the tire condition must be preserved: select TTRACK.

Short-term turnover or temporary staging: select DERACK.

Question 2: How Will the Tires Be Retrieved?

Individually, by hand: select TTRACK.

As a complete layer, by manual handling or equipment: select DERACK.

Question 3: What Is the Dominant Business Objective?

Prevent tire deformation and maintain appearance: select TTRACK.

Maximize handling speed and whole-layer movement: select DERACK.

9. Practical Operating Considerations

The following recommendations are based on the structures described in the presentation. They are engineering recommendations rather than additional product claims confirmed by the video.

9.1 TTRACK

Operating Area Recommended Practice
Frame deployment Confirm that the folding frame is fully opened and securely locked before loading
Rod installation Confirm that every pull rod is correctly seated and secured
Rod storage Return the rods to their storage location inside the rack when the unit is not in use
Upright tire stability Confirm that the tires remain securely positioned and cannot roll out
Cross-stack stability Check that the alternating tire arrangement remains stable before leaving the storage area
Load distribution Confirm that the tire weight remains within the level rating for the selected storage mode
Component inspection Check the folding mechanism, rod fixings and retaining devices during scheduled maintenance
Floor condition Keep the storage floor level, clean and free from standing water
Tire support Do not use tires as structural support for other stored products unless the arrangement has been specifically approved

9.2 DERACK

Operating Area Recommended Practice
Upright installation Confirm that each upright is fully seated and correctly oriented
Upright identification Match each application-specific upright to its correct position
Removed-component storage Provide a dedicated, labeled storage area for the four uprights
Shelf loading Distribute four tires evenly across each shelf
Layer retrieval Confirm that the forklift or other handling equipment can remove a complete layer safely
Upright retention Verify that all upright-retention devices are correctly fitted and locked
Periodic inspection Inspect shelf connections, upright sockets and retaining devices according to the maintenance plan
Site conditions Confirm floor level, floor capacity and clearance required for layer removal
Load rating Do not exceed the approved capacity of the base, uprights or shelf levels

10. Six Lessons from the TTRACK–DERACK Comparison

1. Structural Similarity Does Not Mean Operational Equivalence

TTRACK and DERACK provide comparable storage levels and occupy broadly similar space, yet they create very different handling workflows.

2. Storage Orientation Is Determined by the Frame

DERACK cannot store tires upright in the same manner as TTRACK because it does not have the necessary side support. The operating method follows from the structure.

3. Deformable Products Create a Storage-Duration Requirement

Tires that must not change shape are fundamentally a long-term storage problem. Upright or cross-stacked TTRACK storage is presented as the preferred response.

4. Retrieval Unit Matters in Short-Cycle Operations

When material moves daily and is handled in groups, a flat layer of four tires is more efficient than removing individual tires from an upright position.

5. A Folding Frame Simplifies Component Management

Keeping the folding structure and pull rods together reduces component tracking and makes the rack quicker to deploy.

6. Cost Should Not Decide the Selection

The manufacturing-cost difference is relatively small. The deciding factors are tire condition, storage duration and the method required to retrieve the material.

11. Conclusion

TTRACK and DERACK can both store tires, but they optimize different parts of the handling process.

TTRACK: The Long-Term Storage Solution

TTRACK uses a folding frame with pull rods to support tires in an upright or cross-stacked arrangement. The presenter associates these configurations with long-term storage and a reduced risk of tire deformation.

It is also the simpler assembly:

the folding frame is retained as one unit;

the pull rods are stored inside the rack;

the rack is opened and the rods installed;

and no separate storage arrangement is required for four loose uprights.

DERACK: The Short-Term Handling Solution

DERACK uses a base and four plug-in uprights to create horizontal shelf levels. Four tires are stored flat on each level, allowing the complete group to be removed efficiently.

It is therefore better suited to:

temporary staging;

frequent turnover;

short-term accumulation;

and associated equipment that handles complete layers.

The Selection Rule

Storage Condition Recommended Product
Long-term storage, especially beyond approximately one month, or where tire condition must be preserved TTRACK
Short-term staging, frequent turnover or fast whole-layer retrieval DERACK

The deeper engineering principle is straightforward:

Choose the rack according to how the material rests in it and how it is taken out. Storage levels, footprint and purchase price are secondary considerations.

Send us the tire sizes, the number of tires you hold at peak, how long each group stays in the warehouse and how it is picked — individually by hand or as a complete layer by forklift. Our engineers will confirm the level count, the upright and pull-rod configuration and the floor and clearance requirements for your site. Contact Steel Pallet for a DERACK layout review

Solicitar Detalles de Precios




    Solicitar Lista de Cotización

    Su lista de solicitudes de cotización está vacía.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.