Stbox half-drop gate wire mesh container for line-side WIP picking
Stbox
Contenedor de malla metálica con compuerta de caída media para picking de WIP en línea. El diseño 13967 coloca la abertura en el lado de 800 mm; confirme la dirección de la puerta, la altura de media apertura y las opciones de protección.
Un contenedor de malla metálica allowing operators to pick from the front
When parts are stored in a fully enclosed box, the operator may have to unload the top material before reaching what is needed at the bottom. Stbox changes that WIP routine: open the half-drop gate, access the accessible face, and remove only the required parts.
For requirement 13967, the opening is located on the 800 mm side. The final drawing must confirm the opening direction and the effective half-open height before production. This is a project-controlled detail, not a universal dimension statement for every Stbox configuration.
- Half-drop gate: practical front access for manual loading and selective picking.
- Helical spring hinge: the image-indexed structure uses a continuously wound helical hinge at the mesh panel connection.
- WIP buffer: keep a container in storage at line side while removing a partial quantity instead of emptying the entire unit.
- Industrial handling: the wire mesh container is designed for forklift and pallet truck handling, subject to the final base drawing and handling review.
Choose the access pattern according to the work sequence
LINE-SIDE PICKINGHalf-drop gate
Use the lower access opening when operators need to take components from a WIP cache without fully unloading the cage.
Confirm: opening direction and half-open height
MANUAL LOADINGLoading face with half-drop gate
The lowered gate creates a more direct path for manual loading and part extraction at the container floor. Keep the operator aisle and gate swing area clear.
Verify: part size, reach distance, and aisle clearance
PROTECTION OPTIONLiner or lid when exposure matters
Stbox is not a fully sealed container. Add a PP hollow plate liner when small or delicate parts need a barrier from the mesh; consider a matching lid and lockable cover when dust, falling objects, or access control are part of the requirement.
Confirm: liner coverage, lid and locking requirements
Shorten the path from intermediate stock to the operator
Pick without full unloading
A visible front opening allows taking a partial quantity from the container. This directly addresses the problem of "tipping the whole stack to find the parts at the bottom."
Make WIP visible
The welded mesh allows the line operator and warehouse supervisor to see stored material more easily than through a closed wall, although the exact mesh suitability still depends on part size.
Keep the unit mobile
Forklift and pallet truck handling are supported use cases in the product materials. Final fork access, load distribution, and center of gravity must be verified against the selected base design.
Separate access from protection
Open picking is not the same as dust-proof or theft-proof storage. Use the liner, lid, or lockable cover as a deliberate option rather than treating the basic cage as sealed.
Lock the door geometry before manufacturing
Map the picking task
Provide us with part dimensions, extraction frequency, operator reach, and whether the cage remains at line or returns to the warehouse.
Mark the 800 mm side
For opportunity 13967, place the opening on the specified 800 mm side and identify the required orientation toward the aisle.
Confirm the final drawing
Approve the door opening direction, partial opening height, door swing clearance, lower access, and hinge arrangement from the final engineering drawing.
Validate handling and protection
Confirm load definition, stacking rule, forklift or pallet truck interface, surface treatment, liner, lid, and locking options before releasing the order.
Is a half-drop gate wire mesh container suitable for your picking route?
What makes the Stbox door different?
The selected half-drop gate folds down to expose a manual access face. The product image index also documents a continuous spring or helical hinge at the mesh connection. The final opening direction and partial opening height must be confirmed on the final drawing.
Why is the 800 mm side important for the 13967?
The 13967 names the 800 mm side as the opening side. This affects aisle position, operator reach, line orientation, and the direction the door moves. It must be included in the approval drawing rather than inferred from a generic product photo.
Does the door eliminate all material handling?
No. Reduce la necesidad de descargar completamente un contenedor para una recogida parcial; no reemplaza la planificación de reposición, los límites de alcance seguro o un método definido de presentación de materiales. Las cargas grandes, incómodas o muy profundas aún requieren una revisión de alcance y manejo.
¿Cómo se compara con una caja de acero completamente cerrada?
Una caja cerrada puede ser más adecuada para contención, control de polvo o restricción de acceso, pero oculta la carga y puede forzar más descargas durante una recogida de piezas inferiores. Stbox prioriza la visibilidad y el acceso frontal. Añada un forro o tapa cuando los requisitos de protección superen el acceso abierto.
¿Puede tratarse cada Stbox como una jaula estándar con clasificación de carga?
No. Los registros del proyecto incluyen diferentes dimensiones, definiciones de carga y límites de apilamiento. Para el 13967, el registro fuente indica un requisito de carga dinámica de 1000 kg y recomienda no más de cuatro niveles de apilamiento con no más de 500 kg en cada jaula superior; la confirmación de ingeniería aplicable debe regir el pedido.
¿Cuándo no es esta configuración la elección correcta?
No use la configuración básica de malla abierta cuando las mercancías requieran una barrera de polvo sellada, resistencia al robo o contención de partículas pequeñas sin añadir el forro, tapa u opción de bloqueo adecuados. No libere un diseño hasta que se confirmen el espacio de la puerta, el caso de carga y el equipo de manejo.