Stbox Electro-Galvanized Surface Treatment | ≥8 μm Zinc
Stbox
Stbox project 13967 electro-galvanized wire mesh container with a verified zinc layer of ≥8 μm for general warehouse turnover and rain-exposed outdoor storage. Compare cold and hot galvanizing options and confirm salt-spray acceptance by project.
8 μm Electro-Galvanized Finish for Rain-Exposed Storage
For Stbox project 13967, the electro-galvanized wire mesh container uses a zinc layer of ≥8 μm with even, comprehensive coverage—giving procurement and quality teams a clear basis for general outdoor or semi-outdoor warehouse turnover.
This is a project-verified finish, not a blanket promise for every coating or every outdoor condition. The galvanized surface provides useful protection against rainwater corrosion in ordinary storage and material-handling environments. For long-term exposure to salt spray, coastal atmosphere, chemical contact, standing water, or a defined outdoor service life, confirm the coating selection and acceptance standard for the project before ordering.
- 13967 verification: electro-galvanized zinc layer ≥8 μm.
- Coverage: zinc coating is specified to be uniform and comprehensive across the product surface.
- Application: suitable for general warehouse turnover and outdoor or semi-outdoor temporary storage where rain exposure is expected.
- Scope control: long-term salt-spray or chemical-environment performance requires project-specific coating and acceptance confirmation.
Choose the Finish Around the Real Exposure
PROJECT 13967
Electro-galvanized
The verified Stbox 13967 finish for general warehouse circulation and outdoor or semi-outdoor storage exposed to rainwater.
ABOUT 10 μm
Cold galvanizing option
A cold-galvanized specification can be considered when the project calls for a different zinc-layer target or appearance.
ABOUT 40 μm
Hot-dip galvanizing option
For more demanding corrosion-protection requirements, hot-dip galvanizing can be evaluated as a project option rather than assumed as a standard feature.
A Better Starting Point Than Bare Steel or Weak Paint
Compared with bare steel
Bare carbon steel has no zinc barrier. Once moisture reaches the surface, the corrosion risk is higher and the appearance can deteriorate faster during outdoor handling or temporary storage.
Compared with poor paint
A thin or poorly prepared paint film can be damaged by handling and expose the substrate. The 13967 specification instead identifies the zinc layer and its coverage as coating-control points.
Evidence procurement can check
Ask for the project coating record and the agreed inspection method. “Galvanized” alone is not enough to define a long-term outdoor guarantee.
Protection matched to use
Use the ≥8 μm electro-galvanized Stbox for ordinary warehouse turnover and rain-exposed temporary storage; escalate the coating and acceptance criteria when the environment demands it.
Specify the Coating Before You Specify the Promise
Describe exposure
Tell us whether the cage will stay indoors, under cover, outdoors in rain, near the coast, or around chemicals.
Select the finish
Use 13967 electro-galvanized ≥8 μm for its verified scope, or review cold-galvanized about 10 μm and hot-dip about 40 μm options.
Set acceptance
Confirm zinc-layer measurement, coverage expectations, salt-spray requirements, and any outdoor inspection period in the project documents.
Release production
Approve the written coating specification before production so the delivered wire mesh container is judged against the right requirement.
Questions Procurement and Quality Teams Ask
Was the ≥8 μm electro-galvanized finish verified for Stbox?
Yes. The 13967 project document specifies electro-galvanizing with a zinc layer of at least 8 μm and uniform, comprehensive coverage. This verification belongs to that project scope.
Can this galvanized cage be used outdoors?
It can be used for general warehouse turnover and outdoor or semi-outdoor temporary storage with rain exposure. It should not be read as a lifetime rust-proof guarantee for every outdoor climate or service condition.
What if the cage will face salt spray or chemicals?
Do not select by the word “galvanized” alone. Review the exposure, choose the appropriate coating, and confirm the salt-spray or other acceptance standard for the specific project.
What is the difference between cold and hot galvanizing?
As project references, cold galvanizing is about 10 μm and hot-dip galvanizing is about 40 μm. These are selectable directions, not universal Stbox guarantees; final thickness, process, and acceptance criteria must be confirmed before production.
Does a thicker coating automatically guarantee longer outdoor life?
No. Service life also depends on humidity, salt, chemicals, standing water, handling damage, drainage, and inspection criteria. Match the finish to the actual environment instead of converting a thickness reference into a blanket promise.
What should I send for a coating quotation?
Share quantity, indoor or outdoor location, expected rain or salt exposure, chemical contact, required zinc thickness, and any salt-spray test or site-acceptance standard. We can then align the Stbox finish and quotation scope.