Stbox Industrial Wire Mesh Storage Cage
Stbox
Explore Stbox, a collapsible wire mesh container for industrial parts storage and repeat handling. Compare configurations, options and project checks for stacking, access, forklift use and empty-volume reduction.
A rigid wire mesh container for repeat industrial handling
Stbox is a collapsible steel storage cage—not a fixed rack. It holds parts as a rigid mobile unit when loaded, then folds down to reduce empty-storage and return-transport volume.
The core build is documented around Q235 steel structure, 50 × 50 mm welded mesh, a U-channel reinforced base and formed stacking feet. A half-drop gate supports manual picking, while the base is designed for forklift and pallet-jack handling, subject to final drawing and equipment checks.
- Collapsible: fold empty units for denser warehouse storage and return logistics.
- Stackable: formed feet locate with the lower container; approve every stack against the project load plan.
- Half-drop gate: access parts without fully unloading the cage.
- Four-way handling interface: forklift and pallet-jack use are supported by project evidence; confirm fork openings and operating limits on the final base drawing.
One container platform, different handling priorities
PICKING ACCESSHalf-drop gate cage
Use the open front section for line-side picking and manual loading of parts. Confirm gate orientation, opening position and operator clearance from the project drawing.
PART PROTECTIONPP-lined storage cage
Consider a corrugated PP liner when small parts could fall through the mesh or finished surfaces need separation from steel. Liner coverage, thickness and fixing are project options.
FLOOR LOGISTICSForklift and pallet-jack handling
Move loaded units across the warehouse floor with compatible equipment. Check fork dimensions, load centre, floor condition and the final four-way base interface before operation.
Built for the loaded-to-empty cycle
Rigid repeat handling
Q235 steel structure, welded mesh and a reinforced base are suited to repeated industrial movement when the project load and handling plan are confirmed.
Visual control
50 × 50 mm mesh allows operators to see stored material and supports visual inventory checks, while still requiring a mesh-size review for small parts.
Empty-volume reduction
Collapse empty cages to reduce the footprint of return storage and transport. Folded height and bundling quantity vary by selected design.
Configurable protection
Lids, locks, casters, PP liners and hot-dip galvanizing can be evaluated for the application. They are options—not default Stbox standard equipment.
Specify the cage around your material flow
Define the load
Share part weight, dimensions, distribution, centre of gravity and whether the requirement is static or dynamic.
Set the interface
Confirm selected size, gate side, fork and pallet-jack dimensions, working aisles and required stacking plan.
Choose options
Evaluate PP liner, lid, lock, casters and surface treatment against protection, security, mobility and environment.
Approve the project file
Final dimensions, load limits, coating, packaging and delivery terms are confirmed by the engineering drawing and order documents.
What should you verify before ordering?
How is Stbox different from a cardboard or wooden box?
Stbox is a rigid steel container intended for repeat handling, stacking and visible storage. Cardboard and wood may be better for other weights, protection or packaging requirements; compare the actual duty cycle rather than assuming one solution fits every shipment.
Is Stbox the same as a plastic pallet box?
No. Stbox prioritizes a welded steel frame and mesh visibility for industrial parts. Plastic may be lighter or better suited to certain chemical environments, so material, weight and environment must be compared for the project.
Is it a rack or a closed steel box?
Neither. Stbox is a mobile unit container, not fixed warehouse racking. It is also not a dust-tight or theft-proof closed box. Add a liner, lid or lock only when the application requires and the option is specified.
What is included as standard?
The documented product concept includes the steel cage, welded mesh, reinforced base, formed stacking feet, collapsible construction and half-drop access. Lid, lock, casters, PP liner and hot-dip galvanizing are project options, not assumed standard features.
Can you quote a fixed load, size or stacking height?
Not from the product name alone. Project records contain different sizes and load definitions. We confirm the applicable drawing, load case, stacking limit, fork interface, coating and inspection requirement before quotation.
Which SteelPallet page should I use next?
This is the SteelPallet Stbox system entry point. Continue to the relevant product detail, brand and service pages, or send an inquiry with your dimensions and handling conditions for a project review.