Wie sichert man ein Motorrad auf einer Transportpalette, ohne die Räder zu beschädigen? | Mtrack
Erfahren Sie, wie Sie ein Motorrad auf der Mtrack-Transportpalette sichern: Vorderrad-Klemme mit Handrad, zweiseitige U-förmige Zurrhaken, rampenunterstützte Verladung und projektbestätigte Tragfähigkeit zum Radschutz.
Secure the front wheel before the pallet moves
Front wheel clamped, lashing straps attached and the motorcycle pushed into position on a loading ramp.
Mtrack is a foldable steel motorcycle transport pallet for owners, clubs and equipment handling teams that need a repeatable way to prevent a motorcycle from rolling or tipping during storage and transport. The front wheel clamping mechanism is operated via a handwheel: turn it to clamp the wheel and reverse it to release. Two U-shaped hooks on the sides provide dedicated anchor points for lashing straps.
- Front wheel clamp with handwheel: controlled clamping and releasing on the front wheel.
- Two-sided U-shaped hooks: practical anchor points for lashing straps, shown in the project solutions T1919 and Bad Boyz Cyclez.
- Loading with ramp assistance: guide the motorcycle into the pallet instead of lifting it into position.
- Project-specific load capacity: 500 kg per pallet is documented for projects 14905 and 15052; other project assessments must be confirmed separately.
Adapt the fastening method to the motorcycle
FRONT WHEELClamp with handwheel
The front wheel is positioned in the clamp and secured or released via the handwheel. The exact clamping force and the suitable wheel diameter require project confirmation.
Wheel size: confirm before ordering
LASHING STRAPSU-shaped side brackets
Attach the lashing straps on both sides of the pallet after positioning the motorcycle. Strap type, routing and tension must be matched to the motorcycle's weight and wheel geometry.
Strap specification: confirm per project
LOADINGEntry with ramp assistance
Use the angled entry area to push the motorcycle into the pallet, then check the wheel position and strap arrangement before handling or stacking with the forklift.
Operating method: confirm for site conditions
Wheel protection starts with the right project data
Raddurchmesser
Provide the front wheel diameter and tire information so that the clamping position and contact arrangement can be checked. Mtrack is not automatically suitable for every motorcycle.
Motorcycle weight
Confirm the weight of the loaded motorcycle. The documented load capacity of 500 kg applies to project configurations 14905 and 15052, not as an unconditional universal promise.
Strap arrangement
Strap specification, routing and required tension are not yet general product parameters. They must be checked against the motorcycle and the transport conditions.
Handling discipline
After loading, check the wheel clamp and the straps. Entry and lifting with the forklift should be even, and stacking should only continue after the feet of the upper rack are seated correctly.
A simple loading sequence matched to your motorcycle
Submit data
Send the motorcycle model, front wheel diameter, overall dimensions, loaded weight and the intended storage or shipping conditions.
Adjust clamp
Use the front wheel position and the project review to confirm the handwheel clamp arrangement before production.
Push in and lash down
Use the ramp-assisted entry, operate the handwheel to clamp or release and attach the straps to the two side U-shaped hooks.
Check before transport
Check the wheel contact, strap routing, rack condition and forklift access before transport or stacking.
Questions about securing a motorcycle on Mtrack
How do I secure the front wheel?
Place the front wheel in the clamping device and use the handwheel to control clamping or releasing. The required clamping force and wheel fit must be confirmed for the specific motorcycle.
Where are the lashing straps attached?
The rack has U-shaped hooks on both sides for attaching the lashing straps. The strap specification and final routing depend on the motorcycle weight, wheel geometry and transport condition.
Does Mtrack protect every wheel or fit every motorcycle?
A universal fit should not be assumed. Provide wheel diameter, tire data, motorcycle dimensions and weight for review before ordering. A clamp is not a substitute for a complete lashing check.
Which load capacity should I use?
500 kg per rack is documented for project configurations 14905 and 15052. The supplied project note also lists 350 kg for 15385 and 250 kg for 15575. Confirm the applicable load capacity for your exact design; these values are not a uniform load capacity.
Can I push the motorcycle into the rack?
Yes, the Mtrack concept uses an inclined entry area to facilitate pushing it in. Confirm the operating layout and site conditions with the project team.
How can I request the right securing solution?
Use the inquiry form to submit the motorcycle model, wheel diameter, loaded weight, strap requirements, quantity and the shipping or storage purpose. We can then review the clamp, hooks and load capacity together. See also PDP-01, BLOG-03 and CASE-02, if these pages are available on your website.
B2B-Regalsystem Tragwerksberechnung
Geben Sie Ihre strukturellen Richtlinien unten ein. Unser Berechnungssystem ermittelt Materialdurchbiegung, Spannungsgrenzen und empfiehlt optimale Profile.
Klicken Sie auf Berechnen, um Spannungsfaktoren zu ermitteln und Empfehlungen für Strukturzeichnungen anzuzeigen.