¿Cómo asegurar una motocicleta en un rack de envío sin dañar las ruedas? | Mtrack
Aprenda cómo asegurar una motocicleta en el rack pallet de envío Mtrack: abrazadera de rueda delantera con volante, ganchos de amarre en forma de U a ambos lados, carga asistida por rampa y capacidad confirmada por proyecto para la protección de las ruedas.
Secure the front wheel before moving the rack
Front wheel secured, tie-down straps hooked, and the motorcycle pushed into position on a loading ramp.
Mtrack is a foldable steel pallet rack for motorcycle shipping, designed for owners, clubs, and equipment handling teams that need a repeatable way to prevent a motorcycle from rolling or tipping during storage and transport. The front wheel securing mechanism is operated by a handwheel: turn it to secure the wheel and reverse the operation to release it. Two U-shaped hooks on the sides provide dedicated attachment points for tie-down straps.
- Front wheel securing with handwheel: controlled securing and release on the front wheel.
- U-shaped hooks on both sides: practical attachment points for straps, shown in project solutions T1919 and Bad Boyz Cyclez.
- Ramp-assisted loading: guide the motorcycle into the rack instead of lifting it into position.
- Project rated capacity: 500 kg per rack is documented for opportunities 14905 and 15052; other project ratings must be confirmed separately.
Adapt the fastening method to the motorcycle
FRONT WHEELHandwheel securing
The front wheel is placed in the securing mechanism and secured or released using the handwheel. The exact securing force and suitable wheel diameter require project confirmation.
Wheel size: confirm before ordering
TIE-DOWN STRAPSU-shaped side hooks
Place the tie-down straps on both sides of the rack after positioning the motorcycle. The strap type, routing, and tension must be selected according to the motorcycle's weight and wheel geometry.
Strap specification: confirm according to the project
LOADINGRamp-assisted entry
Use the inclined entry area to push the motorcycle into the rack, then verify the wheel position and strap arrangement before forklift handling or stacking.
Operating method: confirm according to site conditions
Wheel protection starts with the right project data
Diámetro de la rueda
Proporcione el diámetro de la rueda delantera y la información del neumático para que se puedan revisar la posición de la sujeción y la disposición de contacto. Mtrack no es adecuado de forma automática para todas las motocicletas.
Motorcycle weight
Confirm the loaded motorcycle weight. The documented rated capacity of 500 kg applies to project configurations 14905 and 15052, not as an unconditional universal promise.
Strap arrangement
Strap specifications, routing, and required tension are not yet general product parameters. They must be verified according to the motorcycle and transport conditions.
Handling discipline
After loading, check the wheel clamp and straps. Forklift entry and lifting must be smooth, and stacking should only continue after the upper rack feet are properly seated.
A simple loading sequence, verified for your motorcycle
Share the data
Send the motorcycle model, front wheel diameter, overall dimensions, loaded weight, and intended storage or shipping conditions.
Adjust the clamp
Use the front wheel position and project review to confirm the handwheel clamp arrangement before production.
Push and secure
Use the ramp-assisted entry, operate the handwheel to secure or release, and connect the straps to the two side U-shaped hooks.
Check before moving
Inspect the wheel contact, strap routing, rack condition, and forklift access before transport or stacking.
Questions about securing a motorcycle in Mtrack
How do I secure the front wheel?
Place the front wheel in the securing mechanism and use the handwheel to control securing or release. The required securing force and wheel adjustment must be confirmed for the specific motorcycle.
Where are the tie-down straps attached?
The rack has U-shaped hooks on both sides for strap fastening. The strap specification and final routing depend on the motorcycle's weight, wheel geometry, and transport condition.
Does Mtrack protect every wheel or fit every motorcycle?
A universal fit must not be assumed. Provide the wheel diameter, tire details, motorcycle dimensions, and weight for review before ordering. A clamp does not replace a complete tie-down check.
What capacity should I use?
500 kg per rack is documented for project configurations 14905 and 15052. The supplied project record also identifies 350 kg for 15385 and 250 kg for 15575. Confirm the applicable rating for your exact design; these figures are not a universal rating.
Can I push the motorcycle into the rack?
Yes, the Mtrack concept uses an inclined entry area to assist push loading. Confirm the operating design and site conditions with the project team.
How can I request the right securing solution?
Utilice el formulario de consulta para enviar el modelo de la motocicleta, el diámetro de la rueda, el peso cargado, los requisitos de las correas, la cantidad y el uso de envío o almacenamiento. Luego podemos revisar juntos la abrazadera, los ganchos y la capacidad. Vea también PDP-01, BLOG-03, y CASE-02 si esas páginas están disponibles en su sitio.
Calculadora de Ingeniería Estructural para Racking B2B
Ingrese sus parámetros estructurales a continuación. Nuestro sistema de cálculo calcula la deflexión del material, los límites de tensión y recomienda perfiles óptimos.
Haga clic en Calcular para computar los factores de tensión y mostrar las recomendaciones de dibujo estructural.