Hoe zet je een motorfiets vast op een transportrek zonder de wielen te beschadigen? | Mtrack
Leer hoe je een motorfiets vastzet op het Mtrack transportpalletrek: handwiel voorwielklem, tweezijdige U-vormige sjorhaken, laden met oprijklep en projectbevestigde capaciteit voor wielbescherming.
Secure the front wheel before the rack is moved
Front wheel clamped, tie-down straps attached and the motorcycle pushed into position on a loading ramp.
Mtrack is een opvouwbaar stalen motorfiets transportpalletrek voor eigenaren, clubs en teams die apparatuur verwerken en behoefte hebben aan een herhaalbare manier om te voorkomen dat een motorfiets rolt of kantelt tijdens opslag en transport. Het klemmechanisme voor het voorwiel wordt bediend met een handwiel: draai het om het wiel vast te klemmen en draai de andere kant op om het los te laten. Twee U-vormige haken aan de zijkanten bieden speciale bevestigingspunten voor sjorbanden.
- Front wheel clamp with handwheel: controlled clamping and releasing at the front wheel.
- U-shaped hooks on two sides: practical attachment points for tie-downs, as seen in the project solutions T1919 and Bad Boyz Cyclez.
- Loading with ramp: guide the motorcycle into the rack instead of lifting it into place.
- Project capacity: 500 kg per rack is documented for options 14905 and 15052; other project loads must be confirmed separately.
Choose the securing method that suits the motorcycle
FRONT WHEELClamp with handwheel
The front wheel is placed in the clamp and secured or released via the handwheel. Exact clamping force and suitable wheel diameter require project confirmation.
Wheel size: confirm before ordering
TIE-DOWN STRAPSU-shaped side hooks
Attach tie-down straps to both sides of the rack after the motorcycle is in place. Type of strap, routing and tension must be selected based on the weight and wheel geometry of the motorcycle.
Strap specification: confirm per project
LOADINGLoading with ramp
Use the inclined access section to push the motorcycle into the rack and then check the wheel position and tie-down strap arrangement before moving or stacking with the forklift.
Operating method: confirm for location conditions
Wheel protection starts with the correct project data
Wieldiameter
Provide the diameter and tire information of the front wheel so that the clamp position and contact arrangement can be assessed. Mtrack is not automatically suitable for every motorcycle.
Motorcycle weight
Confirm the weight of the loaded motorcycle. The documented 500 kg rating applies to project configurations 14905 and 15052, not as an unconditional universal promise.
Strap arrangement
Specification, routing and required tension of straps are not yet general product parameters. They must be checked against the motorcycle and transport conditions.
Handling discipline
After loading, check the wheel clamp and the straps. Insertion and lifting with the forklift must proceed smoothly, and stacking may only take place after the legs of the upper rack are correctly positioned.
A simple loading sequence, tailored to your motorcycle
Share the data
Send the motorcycle model, front wheel diameter, overall dimensions, loaded weight and intended storage or shipping conditions.
Adjust the clamp
Use the front wheel position and project assessment to confirm the handwheel clamp arrangement before production.
Push in and secure
Use the ramp for insertion, operate the handwheel to clamp or release, and attach straps to the two U-shaped hooks on the side.
Check before moving
Inspect wheel contact, strap routing, rack condition and forklift access before transport or stacking.
Questions about securing a motorcycle on Mtrack
How do I secure the front wheel?
Place the front wheel in the clamp mechanism and use the handwheel to control clamping or releasing. The required clamping force and wheel fit must be confirmed for the specific motorcycle.
Where are the straps attached?
The rack has U-shaped hooks on both sides for attaching straps. The specification and final routing of the straps depend on the motorcycle weight, wheel geometry and transport conditions.
Does Mtrack protect every wheel or fit every motorcycle?
A universal fit must not be assumed. Provide wheel diameter, tire data, motorcycle dimensions and weight for assessment before ordering. A clamp is not a replacement for a complete securing check.
Which capacity should I use?
500 kg per rack is documented for project configurations 14905 and 15052. The supplied project file also states 350 kg for 15385 and 250 kg for 15575. Confirm the applicable rating for your exact design; these figures do not constitute one universal rating.
Can I push the motorcycle into the rack?
Yes, the Mtrack concept uses an inclined insertion section to facilitate riding in. Confirm the operational layout and location conditions with the project team.
How can I request the right securing solution?
Use the request form to provide the motorcycle model, wheel diameter, loaded weight, strap requirements, quantity and use for shipping or storage. We can then assess the clamp, hooks and capacity together. See also PDP-01, BLOG-03 en CASE-02 if those pages are available on your site.
B2B Racking Structurele Engineering Calculator
Voer hieronder uw structurele richtlijnen in. Ons rekensysteem berekent materiaaldoorbuiging, spanningsgrenzen en adviseert optimale profielen.
Klik op Berekenen om spanningsfactoren te berekenen en aanbevelingen voor structurele tekeningen weer te geven.