🏭 Steelpallet · Factory Direct · OEM Available

10 m Steel Tube Storage Rack: 1,300 × 1,300 mm Internal Clearance, 5 t Load, Three-High Stacking
derack

Technical solution for a 10 m steel tube storage rack: 1,300 × 1,300 mm internal clearance, 5,000 kg load per rack, hot-dip galvanised, three tiers of stacking, removable column frames.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
10 m Steel Tube Storage Rack: 1,300 × 1,300 mm Internal Clearance, 5 t Load, Three-High Stacking
Technical Solution · Steel Pipe and Tube Storage

10 m Steel Tube Storage Rack: 1,300 × 1,300 mm Internal Clearance, 5 t Load, Three-High Stacking

A stacking rack engineered for 12 m long parts stored outdoors: 10,000 mm internal length, 1,300 × 1,300 mm internal width and height, 5,000 kg load per rack, three tiers of stacking and hot-dip galvanised surface treatment. Inserted, removable column frames reduce transport and storage space, and the fully welded base keeps the structure stable at 1,250 kg self-weight.

Request a drawing for your tube and pipe lengths

Long parts specified by the customer for outdoor storage

Customer Requirement Analysis:

The customer needs a rack to store the parts shown in the picture below.

The parts are 12 m long and are stored outdoors.

The internal space of the rack is height × width = 1,300 × 1,300 mm, the rack length is 10 m, and the dynamic load of a single rack is 5 t.

Long parts specified by the customer for outdoor storage

Parameter Table

No. Item Parameter value Remark
1 Internal length 10000mm
2 Internal width 1300mm
3 Internal height 1300mm
4 Load per rack 5000kg
5 Stacking tiers 3 tiers
6 Surface treatment Hot-dip galvanising

Technical Solution Description

The pictures below are the sketch model we drew from the information you provided. Next, let me show you the specific parameters and details of this pipe rack.

Draft CAD model of the tube storage rack drawn from customer information

This rack uses an insert-and-pull structure. Four column frames are designed on each side, and the column frames can be pulled out to save transport and storage space. The base is fully welded, so the structure is comparatively stable. The overall self-weight is 1,250 kg.

Inserted column frame design of the steel tube storage rack

Insert-and-pull column frame design

Removable column frame detail of the storage rack

The internal length of the rack is 10,000 mm and the internal width is 1,300 mm.

Rack internal length 10000 mm and internal width 1300 mm

The outer height is 1,705 mm and the internal storage height is 1,300 mm.

Rack outer height 1705 mm with 1300 mm internal storage height

Material specification of the rack

Steel sections and material specification of the storage rack
Steel material layout of the tube storage rack

The bottom recess is used as the stacking location limit

Bottom recess used as stacking location limit

Rendering of the rack after loading with goods

Storage rack loaded with long tube parts
Loaded rack arrangement for long material storage

Stacking rendering; three tiers of stacking recommended

Three-high stacking arrangement of loaded storage racks

For transport the column frames can be pulled out before stacking, 7 racks per stack.

Similar products

Similar profile storage rack produced previously
Similar rack design for profile storage

This is a profile storage rack we have produced, storing 6 m pipes.

Previously produced profile storage rack holding 6 m tubes
Reference view of the 6 m tube profile storage rack

Packing and container loading plan

A 40 ft high cube container can load 8 large racks.

Packing reference:

Packing reference with stretch film and strapping

The product is packed with stretch film plus strapping. This method does not create extra packing cost, but it cannot fully guarantee that the surface coating will not be damaged by collision between products during transport. A more reliable wooden crate packing is also available; the crate is calculated into the product cost at our purchase price. (Wooden crate price = RMB 90 per m².)

Items requiring further discussion

We have prepared a preliminary interpretation of this solution for you. If you would like to know more about this stacking rack, we can hold an online meeting to discuss how they work and see whether further adjustment is needed. We look forward to studying this together with you.

Send us the part length, the internal height and width you need, the load per rack and the number of stacking tiers. We will return a dimensioned drawing, a material list and a container loading plan for your project. Send your tube storage requirements

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.