Aisle first, rows second: how the 10 x 4.3 m project compared one row against two, why about 1,550 mm of residual aisle was rejected for forklift retrieval,…
Read moreSelection & Custom Design
Articles and technical solutions
An unwritten load limit is the start of drawing rework, sampling and freight replanning on custom cage orders. Here are the seven points to confirm in writing, why…
Read moreA cage, a folding box and a pallet cage are not the same product. Two recurring misrouting patterns send folding container inquiries to the wrong drawing, and what…
Read moreA practical pre-check guide for turning an existing cantilever rack into a cable reel rack: interface dimensions, load path and stability checks, reference limits such as 500 mm…
Read moreA 10 x 4.3 m strip with 1,200 mm deep racks on both sides left only about 1,550 mm of aisle on one documented project. Here is how…
Read moreA 737–2,007 mm reel list cannot sit on one shelf height. Here is the diameter-band split used on a documented 22-reel project: a two-level band with four reel…
Read moreCompare a PP hollow-board liner with a finer mesh specification for small parts in a Stbox wire mesh container. Use the decision tree to reduce loss, scratching, and…
Read moreA 2T mark on a Mytrack stillage image is a design requirement, not an unconditional certified SWL. Learn how to verify the approved drawing and load-test evidence before…
Read moreA practical boundary guide for buyers specifying galvanized Stbox wire mesh containers: documented rain exposure, project coating options, and corrosion acceptance criteria.
Read moreA practical quality guide to Stbox wire diameter records, caliper inspection boundaries, structural reserve and the procurement risk of thin-wire substitutions. Final dimensions and acceptance criteria follow the…
Read moreProject 14346 shows why the crossmembers must follow the pallet feet, not a generic frame rhythm, when wooden or plastic pallets need protection from base deformation.
Read moreMesh keeps the load visible. Steel plate keeps it contained. Sebox can use the same outer frame and switch the insert to match part size, handling method, and…
Read more