Technical Solution · Project 14306 Inverted Stack Racks (Rerack): Technical Solution for Cold Store Space Utilization A two-layer cold-store storage solution built from inverted stack racks linked by…
Read moreFood, Agriculture & Cold Storage
Articles and technical solutions
Technical Solution 1200 × 1200 mm Potato Cold Storage Stacking Rack A plug-in stacking rack engineered for 1000 kg per unit and four-high stacking inside a cold room,…
Read moreTechnical Solution Stackable Steel Frame for Bagged Onion Storage — 1200 × 1200 mm, 1.5 t Design Load, Three-High Stacking A galvanized-tube welded plug-in frame engineered for bagged…
Read moreLearn how floor-stack compression and trapped temperature and moisture can damage sensitive loads, and when a demountable post pallet is the right control.
Read moreWhy a Wooden Pallet Can Become an Export Liability Wooden pallets are the default in many warehouses, and for plenty of domestic, low-risk moves they do the job.…
Read moreStack ten layers of bags, boxes or tires on the floor and the load does not spread evenly. It lands on the bottom layer. In powder, feed and…
Read moreFor enclosed cold rooms and freezer warehouses, electrostatic powder coating is often the practical finish; outdoor rain and long wet exposure need a stronger corrosion spec.
Read moreRerack inner size should follow the pallet footprint and cargo envelope, especially when a warehouse runs both 1100×1100 and 1200×1200 pallets. This guide explains how custom project sizing…
Read moreA practical comparison of nestainer racks with drive-in racking, selective pallet racks, post pallets, and wire mesh containers for warehouses that need layout flexibility, seasonal change, and better…
Read moreWhy inverted nestainer racks are used in cold storage to avoid floor penetration, preserve insulation, organize frozen cartons, and support forklift-ready 100 mm nesting gaps.
Read moreA direct comparison of floor stacking and Strack nestainer racks, focusing on bottom-load crush, topple risk, FIFO access, and when fork-ready nesting racks make more sense.
Read moreA practical comparison of spray coating and hot-dip galvanizing for cold storage racks, with cost guidance for humid and chilled environments.
Read more