AGrack Glass Storage Rack: Technical Solution for Vertical Glass Storage and Stacking
Technical solution for vertical glass storage: AGrack racks with 1000 kg per unit, 3-layer stacking, two-way fork entry, 10 mm rubber strip protection and folding when empty.
AGrack Glass Storage Rack: Technical Solution for Vertical Glass Storage and Stacking
Two rack configurations for vertical glass storage: 1000 kg per unit, up to 3 stacking layers when loaded, two-way fork entry, 10 mm internal rubber strip protection on every cargo contact face, and folding when empty to cut storage and transport space.

Customer Requirements Analysis:
Vertical storage of glass.
Glass sizes: 600×200×6 mm and 600×500×6 mm.
Two-way fork entry.
Technical Solution Description
Parameter Table
| External dimensions | 1600×1150×900 |
|---|---|
| Internal dimensions | 1405×936×595 |
| Load capacity per unit | 1000 kg |
| Maximum stacking layers when loaded | 3 |
| Unit dead weight (excluding rubber strips) | 86 kg |

This product consists of a base, left and right side doors and a rear door. Fork pockets are built into the base to allow two-way fork entry; the fork pocket dimensions are customised to customer requirements (the customer needs to provide the forklift fork width, fork thickness and fork centre distance).

Rope tie rings are provided on the base so that the load can be lashed down after loading.

All inner faces of the rack that come into contact with the cargo are fitted with rubber strips to protect the cargo effectively. The rubber strips are 10 mm thick, contain a steel insert, and are fixed to the rectangular tubes with self-tapping screws.



It can be folded when empty, saving space in storage or transport.


It can be stacked when loaded.



Parameter Table
| External dimensions | 1450×1100×850 |
|---|---|
| Internal dimensions | 1450×850×548 |
| Load capacity per unit | 1000 kg |
| Maximum stacking layers when loaded | 3 |
| Unit dead weight (excluding rubber strips) | 75 kg |

Plug-in structure — saves space when transported or stored empty.

When loaded it can be stacked for storage, making full use of the available height.

Once stacked, the products as a whole are packed with stretch film plus strapping (see the figures below). This method creates no additional packing cost, but it cannot fully guarantee that the surface paint film will not be damaged by knocking between products during transport. Such damage does not affect the function of the rack, only its local appearance. A more dependable wooden crate packing is also available; the wooden crate is charged into the product cost at our purchase price and it reduces the number of units loaded per truck.


Finally, thank you for reading this far. Please consider whether the product described above meets your operating requirements, and we would appreciate your answers to a few questions:
What are the parameters of the forks on the forklift you use?
Which of the rack models do you finally choose?
Do you accept the free packing method we provide?
If you have any further questions or requirements, we will do our best to meet them, and we look forward to our next conversation.
Tell us your glass sizes, load per unit, required stacking layers and the fork width, fork thickness and fork centre distance of your forklifts. We will confirm the matching AGrack model, the fork pocket layout and the packing method before quotation. Contact the AGrack engineering team