AGrack Glass Storage Transport Rack: Technical Solution for 2000×1300×12mm Glass Storage and 2500kg Load Stacking
Technical solution for a 2500kg glass storage transport rack handling 2000×1300×12mm glass: 2-tier stacking, folding when empty, 10mm rubber padding, 25 units per 20GP.
AGrack Glass Storage Transport Rack: Technical Solution for 2000×1300×12mm Glass Storage and 2500kg Load Stacking
A dedicated glass storage and transport rack built around the customer's 2000×1300×12mm glass. Each unit carries 2500kg, supports 2-tier loaded stacking and folds when empty. Base, side door and back door are fully welded steel, all glass contact surfaces are lined with 10mm rubber strips, and 25 units fit in a 20GP container while 60 units fit in a 40HQ container.

Customer Requirement Analysis:
Glass to be stored, glass size 2000×1300×12mm.
Load capacity 2500kg per unit, 2-tier loaded stacking, collapsible when empty.
Surface treatment: powder coating.
Technical Solution Description
Parameter Table
| External dimensions | 2245×1150×1577 |
|---|---|
| Internal dimensions | 2050×900×1300 |
| Load capacity per unit | 2500kg |
| Max. loaded stacking tiers | 2 |
| Loading quantity in 20GP | 25 |
| Loading quantity in 40HQ | 60 |

This product consists of a base (1), a side door (2) and a back door (3). The base is provided with forklift channels that allow two-way fork entry; the channel dimensions are customized to customer requirements (the customer needs to provide the fork width, fork thickness and usual fork center distance of the forklift).

The base is fitted with tie-down rope rings, which can be used to lash and secure the goods after loading.

All inner side surfaces of the rack where they contact the goods are fitted with rubber strips to effectively protect the goods. The rubber strip is 10mm thick and has an internal steel plate; it is fixed to the rectangular tube with self-tapping screws.



It can be folded when empty, saving more space in storage or transport.


It can be stacked when loaded.


Display of part of our previous products (structure display only; the surface treatment of the products in these pictures is hot-dip galvanizing).




After stacking, the racks are packed with stretch film plus strapping (as shown below). This method does not create extra packing cost, but it cannot fully guarantee that the paint film on the surface will not be damaged by contact between products during transport. Such damage does not affect the function of the product and only slightly affects the local appearance. A more reliable packing option (such as wooden crates) is also available; wooden crates are quoted into the product cost strictly at our purchasing price, but note that they reduce the loading quantity per vehicle.


Finally, thank you for watching to the end. Regarding the product introduction above, please consider whether it meets your operating requirements; if you have any questions, we can discuss them in another meeting.
Whether the free packing method we provide is acceptable to you.
The surface treatment of all products is powder coating; the color is to be confirmed, default blue RAL5010.
If you have any other questions or requirements, we will do our best to meet your needs and look forward to our next communication.
Send us your glass size, weight per unit load, stacking requirement, forklift fork dimensions and target container, and we will confirm the rack dimensions, rubber strip layout and loading quantity for your case. Contact Us