Collapsible Wire Mesh Container for Component Storage — 1000 kg Technical Solution
Stbox
Technical solution for a 1000 kg dynamic load collapsible wire mesh container: 800×1200×890 mm, 190 mm folded height, 50×50 mm mesh, 5.8 mm wire, 800 mm opening side, electro-galvanized finish, plus packing, stacking and handling guidance.
Collapsible Wire Mesh Container for Component Storage — 1000 kg Dynamic Load
A 1000 kg load-rated collapsible wire mesh container solution for storing customer components, with an 800 mm opening side, 800 × 1200 × 890 mm body size, 190 mm folded height, 50 × 50 mm mesh, 5.8 mm wire diameter and electro-galvanized surface treatment, plus packing, stacking and handling guidance.

Customer Requirement Analysis:
Wire mesh containers are required to store the customer's components;
The load capacity of a single wire mesh container must reach 1000 kg;
The customer has specified the length and width of the container: the width should be 80 cm, the length 110 ± 10 cm, and the height can follow our recommended 89 cm; 18–27 units are required;
The opening side should be on the 800 mm side.
Customer's attached drawing:

Technical Solution Description
Dimensions and Appearance of the Wire Mesh Container

Specification Parameter Table
| No. | Length L (mm) | Width W (mm) | Overall height H (mm) | Folded height h (mm) | Mesh size n (mm) | Wire diameter (mm) | Dynamic load (kg) | Product weight (kg) |
|---|---|---|---|---|---|---|---|---|
| 1 | 800 | 1200 | 890 | 190 | 50×50 | 5.8mm | 1000 | 47 |
| 2 | ||||||||
| 3 |
Wire Mesh Container Sample Images

Unfolded state

Half-open gate state

Folded state

Stacking foot appearance
Surface anti-corrosion treatment of the pallet:

Electro-galvanized surface with a zinc coating thickness of ≥ 8 μm. The electro-galvanized layer is uniform and complete, suitable for outdoor use, and provides good resistance to rain corrosion.
Packing and Loading Plan

10 units per stack when empty; a single stack measures 1240 × 1240 × 1600 mm.
Packing reference style:

The product is packed with stretch film plus strapping. This method does not generate additional packing costs, but it cannot fully prevent surface paint damage caused by collisions between products during transport. A more reliable wooden crate packing can also be selected; the cost of the wooden crate is calculated into the product cost at our purchase price. (Wooden crate price = 90 CNY/m²)
Implementation Plan and Delivery Schedule
The sales representative can provide this content once the customer has specific quantity and production schedule requirements.
After-Sales Service Plan
None
Risk Assessment
Operate the forklift at a uniform speed when entering and lifting with the forks; do not fork aggressively, as this may damage the product and affect its use.
Regularly inspect the base, mesh panels and other components for bending, deformation or weld failure, so as to avoid hazards caused by problems with the frame components.
During static stacking, the operator must confirm that the feet of the upper container have fully landed on the mesh panel of the lower container before releasing it, in order to avoid the danger of a stack collapsing due to improper stacking.
Stacking with loads places significant stress on the mesh panels of the lower containers. The upper containers should not be loaded too heavily; a stacking height of ≤ 4 layers is recommended, with a load of ≤ 500 kg per upper layer.
Share your dimensions, opening side, load capacity and required quantity, and our team will confirm the configuration, packing method and delivery plan for your project. Contact us for a wire mesh container quotation