🏭 Steelpallet · Factory Direct · OEM Available

Stackable Rack Technical Solution for Vertical Pipe and Bar Storage
derack

Technical solution for a 1200 x 1200 x 1550 mm welded stackable rack: four removable posts, 1.5 t per unit, four-layer stacking, galvanized finish and a 2000-piece loading plan.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Stackable Rack Technical Solution for Vertical Pipe and Bar Storage
Technical Solution

Stackable Rack Technical Solution for Vertical Pipe and Bar Storage

A 1200 x 1200 x 1550 mm welded stackable rack: one base with four removable posts, 1.5 t per unit, stackable four high, galvanized surface treatment, and a half-rotated loading pattern for 2000-piece delivery.

Send your load details

derack technical source image

Customer Requirement Analysis

First requirement:

Cargo overall dimensions and quality standard:

Each set consists of one base and four removable upright posts. Material: square tube and angle steel, Q345B (foot cups Q235B). The base dimensions are 1200 mm x 1200 mm x 300 mm. The four sides of the base frame use flat square tube 40 mm x 40 mm x 2.5 mm, and the middle uses angle steel and square tube (5 rows + 2 rows), angle steel 40 mm x 40 mm x 2.5 mm. The four corner posts are 50 mm x 50 mm x 3.5 mm. The upright posts are 1700 mm long, 40 mm x 40 mm x 2.75 mm. Foot cup thickness is 3 mm. The total weight of the base plus four posts is 51 kg +/- 0.5 kg. Maximum load per single unit is 5 t. The pallet is fully welded with no obvious burrs on the surface. Pallet process flow: after welding, acid pickling for rust removal, then hot-dip galvanizing. Zinc coating thickness is 55 microns or more. Color: silver white.

After study, the surface treatment is galvanized tube with silver powder touch-up spraying after welding; the material used is galvanized square and rectangular tube, and the base square tube raw material has Q235-level mechanical properties.

Second requirement change:

Stacking four layers with 1700 mm posts would exceed the warehouse height, so the posts are adjusted to 1500 mm; the other requirements follow the first requirement.

Technical Solution Description

Appearance of the rack

derack technical source image

Material and basic dimensions of the stackable rack:

derack technical source image

Three-dimensional view

derack technical source image

Top view

derack technical source image

The fork entry height at the bottom is 110 mm, the stackable rack's own weight is 50 +/- 1.5 kg, the load capacity per unit is 1.5 t, and it can be stacked up to 4 layers.

derack technical source image

Bottom appearance

Packaging and Loading Plan

derack technical source image
derack technical source image

During transport we stack the racks in this half-rotated pattern to make the most of the vehicle's space utilization, with 45 stackable racks per stack.

derack technical source image

Loaded in the half-rotated pattern, with a maximum dimension of 1500 x 1500 mm, the racks can be placed on both sides of a 3 m wide, 17.5 m flatbed trailer. Considering the 31 t vehicle weight limit, about 600 stackable racks can be loaded, and the vehicle still has surplus volumetric space.

Packaging reference style:

derack technical source image
derack technical source image
derack technical source image

Products are packed with stretch film plus strapping. This method incurs no additional packaging cost, but it cannot fully prevent surface coating damage caused by collisions between products during transport. A more reliable wooden crate packing is also available, with the crate cost calculated into the product cost strictly at our purchase price. (Wooden crate price = RMB 90 per square meter.)

Implementation Plan and Schedule

The sales representative can provide this content once the customer has specific quantity and production schedule requirements.

After-Sales Service Plan

None

Risk Assessment

The product must not be exposed to prolonged rain; long-term rain exposure causes water to accumulate inside the tubes, which leads to internal rust and rusty water flowing out, affecting the product appearance.

Forklift entry and lifting must be operated at a uniform speed; do not fork roughly, to avoid product damage and impaired use.

Regularly inspect the base, upright posts and other components for bending, deformation or weld separation, to avoid danger caused by problems with rack components.

During static stacking, the operator must confirm that the foot cups of the upper rack have fully landed on the upright posts of the lower rack before releasing the load, to avoid toppling hazards caused by improper stacking.

Commercial Section

Product Price

Name Product parameters (outer dimensions) Price (RMB) Quantity (pcs) Total price (RMB)
Stackable rack 1200*1200*1550 2000
Remark The quotation includes tax and freight (ordinary invoice issued) and excludes packaging.

Payment terms: 30% prepayment; after acceptance inspection before shipment, the balance of the current batch is paid and shipment is arranged.

Quotation validity: 7 days.

Lead time: the first 25 days for 500 pcs, then 40 days for 1500 pcs, total lead time 65 days.

Send your load weight, stacking height and target quantity, and we will confirm post height, base size, surface treatment and the loading plan for your site. Request a quote

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.