Glass Storage Transport Rack: Technical Solution for 10-Tonne Crate Loads and Two-Level Stacking
Bgrack
Technical solution for a glass storage transport rack carrying four 2600 kg glass crates per unit, 10400 kg per rack, stacked two levels, with load simulation results.
Glass Storage Transport Rack: Technical Solution for 10-Tonne Crate Loads and Two-Level Stacking
An assembled steel rack built around the customer's own glass crates: 3210×2250 mm crate footprint, 2600 kg per crate, four crates per rack and 10400 kg total per rack, stacked two levels high. This document covers the load simulation result, the bolted structure, the protection and fixing questions raised, and the packaging options.

Customer requirement analysis:
The customer handles glass in the size 3210*2250, 4 mm per sheet, 36 sheets per crate, weight 2600 kg. (Crate size 3210*2250*300 mm)
Each of our racks holds 4 crates, total weight 10400 kg. That is to say, one rack carries 10 tonnes, and the customer also wants to stack two levels.
Technical solution description
Parameter table
| External dimensions | 3590×1500×2708 |
|---|---|
| Internal dimensions | 3350×1400×2300 |
| Load capacity per unit | 10 t |
| Self weight per unit | 665 kg |
| Stackable levels | 2 |

Load simulation test: a total of 2 such structural members together carry the 10-tonne weight, that is, each member theoretically carries 5 tonnes. In the simulation test a 7-tonne weight was applied to a single structural member, and the result passed, so theoretically this design structure retains a safety factor of 1.4.

Taking transport space into account while also considering usability, the unit is made as an assembled structure. It consists of the base (1), the side frames (2), the connecting cross beams (3) and the diagonal braces (4), connected and installed with bolts.


There is no soft protection at the contact points between the wooden crates and the rack (that is, the wooden crates touch the steel directly). If the glass is effectively protected inside the wooden crate, is no further protection needed on the rack?


The rear side of the rack has a cross beam supporting the wooden crates. Should a cross beam also be added at the front position to fix the wooden crates?


Effect of stacking 2 levels.




After the overall stacking, the packaging method is stretch film + strapping bands (as shown in the figure below). This method does not generate extra packaging costs, but it cannot fully guarantee that the surface paint film will not be damaged by knocks between products during transport. Such damage does not affect the function, it only slightly affects the local appearance of the product. A more dependable packaging option can also be chosen (such as wooden crates); the packaging wooden crates are calculated into the product cost entirely according to our purchasing price, and they will reduce the loading quantity of the product.


Finally, thank you for reading up to here. Regarding the product introduction above, please consider whether it can meet your usage requirements; if you have any questions, we can communicate in another meeting.
Whether the free packaging method we provide is acceptable.
The surface treatment of all products is powder coating, the colour is to be determined, default blue RAL5010.
In the meeting, the crane you showed is used to lift the wooden crates onto the rack. Are the two racks also stacked by crane?
Do you have any other questions or requirements? We will do our best to meet your needs and look forward to our next communication.
Send us your glass or crate dimensions, the weight per unit and the required stacking height, and we will review the structure, load capacity and packaging options with you. Contact us