Glass Storage Transport Rack: Technical Solution for Window & Door Frame Transport and Stacking
Bgrack
Custom glass storage transport rack solution for aluminium window and door cargo: one-way plug-in racks, L-shaped glass racks and wheeled stackable racks, 2,500 kg load, forklift and crane handling.
Glass Storage Transport Rack: Technical Solution for Window & Door Frame Transport and Stacking
A configurable rack family for aluminium-frame window and door cargo: one-way plug-in racks for low-cost single-trip delivery, L-shaped racks for long-term glass storage, and wheeled Mgrack units for in-plant transfer and truck transport, with 2,500 kg load capacity and stackable, collapsible designs.

Customer Requirement Analysis:
Used to transport aluminium-frame windows (one-way shipment, low cost), handled by crane and forklift.
Grack: for long-term use, glass height 1200, maximum glass size 3660×2440.
Mgrack: for in-plant transfer and truck transport, castors are required, minimum cross-brace spacing 400.
Technical Solution Description
Bgrack has no fixed specification; it must be customised to the size and load of the window and door cargo. The dimensions shown in the drawing are 2200×1100×2080, and one 40HQ holds 32 units, so the shipped quantity per container is relatively small.


For one-way use, the products below are recommended. They use a plug-in structure, so more units can be loaded per shipment. They can be stacked during storage to save space, and they can handle cargo of different lengths. Rack dimensions can be customised to the cargo size. The tube surface can be left untreated and fitted directly with protective rubber strips, which keeps the cost low.


When the rack is used for lifting, bolts must be installed at the plug-in sleeve positions to connect the rack into a single unit.

Four lifting hooks on the top satisfy the lifting requirement.

For one-way use, the product below can also be considered. It adapts to cargo of different sizes, the cargo is secured to the rack with ropes, and it can be moved by forklift or crane. Because the surface is painted and the welding workmanship is relatively coarse with a less attractive appearance, the cost is relatively lower.

The L-shaped glass rack for long-term use has a powder-coated finish for a smoother painted surface, higher welding requirements and higher-grade rubber.
| External dimensions (L×W×H) | 1800×950×1600 |
|---|---|
| Applicable glass size | 2200×1600 |
| Maximum load | 2500 kg |
| Net weight (excluding rubber) | 73±3 kg |
| Net weight (including rubber) | 80±5 kg |
| Units per full 20GP | 30 units |
| Units per full 40HQ | 88 units |

Mgrack type 1 parameter table:
| External dimensions (L×W×H) | 1820×1120×1580 |
|---|---|
| Maximum load | 2500 kg |
| Net weight (excluding rubber) | 123±3 kg |
| Net weight (including rubber and castors) | 149±5 kg |
| Single-side storage width | 375 mm |
| Storable height | 1200 mm |

It can be moved by forklift or crane, and can also be pushed. Used together with limit rods to secure the glass.


Mgrack type 2 parameter table:
| External dimensions (L×W×H) | 1820×1120×1580 |
|---|---|
| Maximum load | 2500 kg |
| Net weight (excluding rubber) | 145±3 kg |
| Net weight (including rubber and castors) | 175±5 kg |
| Single-side storage width | 350 mm |
| Storable height | 1580 mm |

Mgrack type 3 parameter table:
| External dimensions (L×W×H) | 2400×1120×2385 |
|---|---|
| Maximum load | 2500 kg |
| Net weight (excluding rubber) | 201±3 kg |
| Net weight (including rubber and castors) | 252±5 kg |
| Single-side storage width | 350 mm |
| Storable height | 2000 mm |

Packing and Container Loading Solution
Free packing instructions: after stacking, the whole stack is wrapped in stretch film and secured with strapping bands or ratchet straps. This packing method has no anti-collision function; during transport, vibration may cause slight scuffing, scratches or paint loss on the product surface. This does not affect use, but it may affect the fine appearance. If this is not acceptable, wooden crates or a better packing method can be used, which incurs an additional cost and reduces the number of units loaded per container.



If you have any questions, please reply and we will do our best to meet your requirements.
Implementation Plan and Lead Time
The implementation plan and lead time are provided once the customer confirms specific quantities and production schedules.
After-Sales Service Plan
None.
Risk Assessment
When the forklift enters and lifts the forks, operate at a uniform speed; do not fork aggressively, otherwise the product may be damaged and its use affected.
Regularly inspect the base, uprights and other components for bending, deformation or weld cracking, so that danger caused by faulty rack components is avoided.
During static stacking, the operator must confirm that the feet of the upper rack rest completely on the uprights of the lower rack before releasing, to avoid the danger of a collapsed stack caused by improper stacking.
Tell us your glass sizes, cargo weights, handling method (forklift, crane or push) and shipment pattern — one-way export or long-term in-plant circulation — and we will specify the rack type, dimensions, load rating and container loading quantity for your project. Send Your Cargo Details