Hot-Dip Galvanized Folding Steel Rack for Stone Slab Storage: Technical Solution
Agrack
Technical solution for a hot-dip galvanized folding steel rack storing stone slabs outdoors: 1600×1150×1300 mm, 2000 kg per unit, 3-tier stacking when loaded, foldable when empty.
Hot-Dip Galvanized Folding Steel Rack for Stone Slab Storage
A 1600 × 1150 × 1300 mm folding steel rack for outdoor stone slab storage: 2000 kg per unit, three-tier stacking when loaded, foldable when empty, four-way or two-way forklift entry, and 10 mm rubber padding on every inner surface that touches the goods.

Customer requirement analysis:
Storage of stone slabs.
2 tonnes load capacity per unit, 3-tier stacking when loaded, foldable when empty.
External dimensions 1600 × 1150 × 1300 mm.
For outdoor use, with a hot-dip galvanized surface finish.
Technical solution description
Parameter table
| External dimensions | 1600×1150×1300 |
|---|---|
| Internal dimensions | 1405×936×995 |
| Load capacity per unit | 2000kg |
| Maximum stacking tiers when loaded | 3 |
| Unit dead weight (excluding rubber strips) | 113kg |

This product consists of a base, left and right side doors and a rear door. The base is provided with forklift channels, and four-way or two-way fork entry can be selected; the channel dimensions are customized to customer requirements (the customer needs to provide the fork blade width, thickness and centre distance of the forklift).

The base is fitted with tie-down rope rings, which can be used to lash and secure the goods once loaded.

Every inner side surface of the rack that comes into contact with the goods is fitted with rubber strips, effectively protecting the goods. The rubber strip is 10 mm thick with an internal steel plate, and is fixed to the rectangular tube with self-tapping screws.



The rack can be folded when empty, saving space for storage or transport.


The rack can be stacked when loaded.



The hot-dip galvanized surface finish produces some process holes so that the zinc can drain out. The hot-dip galvanized surface is relatively rough and retains zinc ash and yellow zinc water marks; we clean it as thoroughly as possible, but a small amount of residue may still remain in local areas, as shown in the pictures.







Finally, thank you for reading this far. Based on the product description above, please consider whether it meets your operating requirements, and we would appreciate your answers to a few questions:
Do you need four-way or two-way fork entry for the forklift channels in the base?
What are the parameters of the forklift forks you use?
Do you have any other questions or requirements? We will do our best to meet your needs and look forward to our next conversation.
Two details decide the base design: whether you need four-way or two-way fork entry, and the fork blade width, thickness and centre distance of your trucks. Send those figures together with your slab dimensions and storage layout, and we will confirm the channel size, the stacking configuration and the surface finish for your site. Send your rack requirements