🏭 Steelpallet · Factory Direct · OEM Available

Hot-Dip Galvanized Steel Stackable Rack: 1.5 T per Rack, 2-High Stacking
derack

Project solution for hot-dip galvanized steel stackable racks: 215±5 kg self-weight, 1.5 T load per rack, 2-layer stacking and 24 racks per 40ft high cube container.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Hot-Dip Galvanized Steel Stackable Rack: 1.5 T per Rack, 2-High Stacking
Technical Solution | Stackable Rack Project

Hot-Dip Galvanized Steel Stackable Rack: 1.5 T per Rack, 2-High Stacking

Project solution for the stackable racks requested by the customer: original design retained, hot-dip galvanized finish, rack self-weight 215±5 kg, 1.5 T load per rack, 2-layer stacking and 24 racks per 40ft high cube container.

Request a Stackable Rack Quote

Customer reference drawing of the required stackable rack

QB/C

Technical Solution

Opportunity No.:

Product Name: Derack

Contents

Customer Requirement Analysis: 1

Technical Solution Description 1

Packing and Loading Plan 1

Implementation Plan and Schedule 1

After-sales Service Plan 1

Risk Assessment 1

Customer Requirement Analysis:

The customer requires stackable racks, with drawings and photos attached.

Surface treatment according to the form shown in the images: hot-dip galvanized.

The original design must be maintained, with as many units loaded as possible.

Customer reference drawing of the required stackable rack
Customer reference photo of the required stackable rack

Technical Solution Description

Rack appearance

Appearance of the steel stackable rack
Steel stackable rack frame and post appearance

Stacking detail:

Detail of the stacking corner on the steel stackable rack

Enlarged view of the U-shaped stacking limit:

Enlarged view of the U-shaped stacking limit

Stackable rack material and basic dimensions:

Rack material sections and basic dimensions

Three-dimensional view

Three-dimensional view of the steel stackable rack

Side view

Side view of the steel stackable rack

The overall structural dimensions fully follow the drawing design, and the materials are selected according to our standard domestic materials. The stackable rack self-weight is 215±5 kg, the load capacity is 1.5 T per rack, it can be stacked 2 layers high, and the surface is hot-dip galvanized.

Stacking effect of the loaded steel stackable racks

Stacking effect after loading

Packing and Loading Plan

Packaging arrangement of stacked racks for transport
Stacked and inverted rack packing method

During transport we pack the racks in this way: stack them and then place two units upside down on top, so as to maximize the space utilization of the vehicle, with 8 stackable racks per stack.

Container loading layout of packed stackable racks
Rack bundle placed in the 40ft high cube container

Loading with the method described above, a 40ft high cube container can carry 24 stackable racks, leaving 950 mm of container width free, which can be considered for other suitable products.

Packing reference style:

Reference packing style with stretch film and strapping
Reference packed rack bundle ready for shipment
Reference wooden crate packing option

The product is packed with stretch film plus strapping. This method does not generate extra packing cost, but it cannot fully prevent surface coating damage caused by collision between products during transport. A more reliable wooden crate packing can also be selected, and the crate cost is calculated into the product cost at our purchase price. (Wooden crate price = CNY 90/m²)

Implementation Plan and Schedule

The salesperson can provide this section when the customer has specific quantity and production schedule requirements.

After-sales Service Plan

None

Risk Assessment

When the forklift enters and lifts the forks, the operation must be carried out at a uniform speed. Do not fork violently, so as to avoid product damage that affects use.

Regularly inspect components such as the base and uprights for bending, deformation, weld cracking and other problems, so as to avoid danger caused by problems with rack components.

During static stacking, the operator must confirm that the feet of the upper rack have indeed landed completely on the uprights of the lower rack before it is released. This avoids the danger of toppling caused by improper stacking.

Send us your drawing, the load per rack and the stacking height you need. We will confirm the material sections, surface treatment and container loading plan for your project. Talk to the Steel Pallet Team

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.