L-Shape Glass Holding Rack: Technical Solution for Flat Glass Storage and Internal Transfer
Grack
Technical solution for the SteelPallet L-shape glass holding rack: welded Q235A tube base and rear frame, 500 kg uniform load, shock-absorbing strips, knock-down shipping at 39 units per 20GP.
L-Shape Glass Holding Rack: Technical Solution for Flat Glass Storage and Internal Transfer
SteelPallet L-shape glass holding rack built from fully welded Q235A carbon structural steel tube, with a bolted base and rear frame, a 500 kg uniformly distributed load and shock-absorbing strips on every glass contact surface. Knock-down structure, 39 units per 20GP container.

Product Technical Description
Solution Description
Main Components
The rack mainly consists of a base, a rear frame and plug-in casters. The base and the rear frame are both made of high-quality carbon structural steel tube, and every component is fully welded, so the structure is stable and the load capacity is large. The base and the rear frame are connected by bolts, so the rack can be disassembled for storage, which makes transport and storage easier. Shock-absorbing strips are fitted on the surfaces that contact the glass, preventing the glass from being damaged during transport.

Figure 1 – Base

Figure 2 – Rear Frame

Solution Effect

Product Features
Suitable for panel-shaped goods, especially for temporary storage and internal transfer of fragile goods;
Specifications can be customized according to user requirements;
Composite structure: it can be disassembled and stored flat when empty, which makes storage and transport easier;
Surface treatment uses an electrostatic powder coating process: uniform coating, wear resistant, with good corrosion protection;
Buffer pads are fitted on all surfaces that contact the goods, preventing the steel frame from damaging the goods.
Technical Parameters:
| Overall dimensions | L1660×W700×H1200mm (height excludes casters) |
|---|---|
| Storage space width | 450mm |
| Load capacity | Uniformly distributed load 500kg |
| Product net weight | Approx. 75kg |
| Material | Q235A |
| Surface protection | Electrostatic powder coating |
| Main sections | Base section: 50*2 |
| C-shaped steel: 50*25*2 | |
| 6-inch swivel casters with brake: 4 pcs | |
| Rubber strip: 44*10*26 |
Sample Drawing

Transport Solution
The product is of assembled structure and is shipped in a knocked-down parts condition, so as to maximize the shipped quantity and reduce the transport cost per unit,
20GP container loading plan: 39 units, loading diagram as follows:

Send your glass panel sizes, the load per rack and your container plan. SteelPallet will confirm the frame dimensions, caster arrangement, shock-absorbing strip layout and the knocked-down shipping quantity per 20GP for your project. Contact SteelPallet