Mybox Foldable Steel Pallet Box: Structure, Load Data and Transport Plan
Mybox foldable steel pallet box technical solution: 40×40 carbon steel tube full-penetration welded frame, 3000 kg static / 1000 kg dynamic load, 5 m stacking, 60–80% space saving when folded, customization options and a 10-unit transport volume plan.
Mybox Foldable Steel Pallet Box: Structure, Load Data and Transport Plan
Full technical solution for the Mybox foldable steel pallet box: base, side door and front door built from 40×40 high-quality carbon structural steel square tube with full-penetration welded frame and bracing, 3000 kg static load and 1000 kg dynamic load, stacking up to 5 m, customizable coating, colour, logo and material, plus a calculated 10-unit transport volume plan.

Technical Solution
Structure Introduction
This steel foldable metal box is composed of a base, side doors and a front door. All materials used are high-quality carbon structural steel tubes; the tube specification is normally 40×40 square tube. Both the frame and the internal bracing are full-penetration welded, so the structure is stable and the load capacity is high.

Figure 1 — Base

Figure 2 — Side door

Figure 3 — Front door
Product Features
Foldable design: in the empty state it saves 60%–80% of storage and transport space;
Stackable once loaded, with a maximum stacking height of up to 5 m;
Half-open door design, making it convenient to take goods out after stacking;
Attribute Parameters
Basic Properties
| Product name | Mybox | |
|---|---|---|
| External dimensions | 1300*900*900 (height excluding wheels) | Customizable ☑ |
| Internal dimensions | 1175*775*690 | |
| Folded volume | 1300*900*330 | |
| Product material code | Not available yet | |
| Surface treatment method | Electrostatic powder coating | Customizable ☑ |
| Surface treatment colour | Blue | Customizable ☑ |
| Product self-weight | Approx. 70 kg (excluding wheels) | Customizable ☑ |
| Wheel diameter | 200 mm | |
| Load per wheel | 880 kg | |
| Wheel type | Swivel with brake | |
| Product load capacity | Static load 3000 kg | |
| Dynamic load 1000 kg | ||
| Raw material | Carbon steel Q235 | |
| Main raw material specifications | Square tube 40*2 | |
| Square tube 40*1.5 | ||
| Square tube 30*1.5 | ||
| Steel wire 4 mm |
Customization Options
| Surface treatment method | Powder coating | Cold galvanizing | Hot-dip galvanizing |
|---|---|---|---|
| Surface treatment colour | Default (blue) | Customer customized | / |
| LOGO | Default (standard logo) | Customer customized | No logo |
| Raw material | Default (carbon steel) | Stainless steel |
Packaging and Transport
Packaging Method
After each box is folded, it is wrapped in stretch film and secured with strapping bands, then stacked up to a set number of layers.
Transport Plan
As the quantity is relatively small, the transport volume for 10 units is calculated separately as follows: the folded volume of a single unit is 1300*900*330; 7 units per stack gives a stacked volume of 1300*900*2150, and the other 3 units form one stack with a volume of 1300*900*950.
Sample Drawing

Quality Standard
Not available yet.
Send us your external and internal dimensions, the load you need to carry and your handling method (forklift or castors). We will confirm the frame tube specification, surface treatment, colour and logo requirements, then quote the Mybox folding metal box together with a packing and transport volume plan for your order quantity. Request a quotation