🏭 Steelpallet · Factory Direct · OEM Available

Nestainer Stackable Storage Racks: Dual-Pallet Nesting Rack with Adjustable Stacking Height
strack

Technical solution for 1200 × 1200 × 1200 mm nestainer stackable storage racks accepting 1100 × 1100 mm and 1200 × 1000 mm pallets: 1.2 t per unit, 4-tier stacking, 55/66 kg dead weight, adjustable height posts and 17 m flatbed loading plan.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Nestainer Stackable Storage Racks: Dual-Pallet Nesting Rack with Adjustable Stacking Height
Technical Solution

Nestainer Stackable Storage Racks: Dual-Pallet Nesting Rack with Adjustable Stacking Height

A technical solution for a 1200 × 1200 × 1200 mm nesting rack that accepts both 1100 × 1100 mm and 1200 × 1000 mm pallets. Upright version 66 kg dead weight, inverted version 55 kg, 1.2 t per unit load, 4-tier stacking recommendation, forklift handling and 17 m flatbed loading plan included.

Request this technical solution

strack technical source image

Customer requirement analysis:

In the solution previously issued to our company, the nesting racks were designed for 1100 × 1100 mm pallets. After communication with the end user, a redesign was requested. The requirements and the information to be clarified are as follows:

1. Design the nesting rack size according to both pallet sizes, 1100 × 1100 mm and 1200 × 1000 mm, so that one rack design can be used with both pallets.

2. What is the load capacity of a single nesting rack? What is the maximum stacking height? What is the total load capacity?

3. Can the height of the nesting rack be designed as adjustable?

4. Please provide the basic data of the nesting rack described in item 1 above. What is the service life of the nesting rack?

Technical solution description

As required, a nesting rack with internal dimensions of 1200 × 1200 × 1200 mm is designed. The basic styles of the inverted and upright nesting racks are shown below:

strack technical source image

Inverted nesting rack, three-dimensional view

strack technical source image

Upright nesting rack, three-dimensional view

strack technical source image

Material specification of the inverted nesting rack: dead weight 55 kg, 1.2 t load per unit, 4 tiers recommended for stacking

strack technical source image

Material specification of the upright nesting rack: dead weight 66 kg, 1.2 t load per unit, 4 tiers recommended for stacking

strack technical source image
strack technical source image

For the height-adjustable nesting rack, a reference unit was identified, as shown below:

strack technical source image

This unit is modified from a plug-in nesting rack. The posts are provided with sockets at different heights, which, together with the sockets on the base posts, achieve height adjustment to suit goods of different heights.

Designed to the dimensions we require, with specifications and materials as follows:

strack technical source image

Surface treatment:

strack technical source image

Electrostatic powder coating. Advantages: a wide range of colors and relatively low coating cost. Disadvantages: ordinary anti-corrosion performance, not suitable for prolonged exposure to rain.

strack technical source image

Cold galvanizing. Advantages: better anti-corrosion performance than electrostatic powder coating, including protection inside the tube, so rainwater does not cause rust bleeding. Disadvantages: relatively higher cost, and galvanizing process holes must be provided.

Packaging and truck loading plan

A 17 m flatbed trailer is recommended for transport:

Upright nesting racks: 8 units per stack, stack size 1400 × 1700 × 2600 mm, 20 stacks in total, 160 units

Inverted nesting racks: 12 units per stack, stack size 1400 × 1900 × 2600 mm, 18 stacks in total, 216 units

Packaging reference style:

strack technical source image
strack technical source image
strack technical source image

The product is packed with stretch film plus strapping. This method does not generate extra packaging cost, but it cannot fully prevent surface coating damage caused by collision between units during transport. Wooden crate packing, which offers greater protection, is also available; the crate cost is calculated by crate surface area and included in the product cost.

Implementation plan and lead time

This item is provided once the specific quantity and production lead-time requirements are confirmed.

After-sales service plan

None

Risk assessment

Fork entry and lifting must be carried out at uniform speed. Violent fork handling can damage the product and affect its use.

Regularly inspect the base, posts and other components for bending, deformation or weld cracking, to avoid danger caused by faulty rack components.

During static stacking, the operator must confirm that the feet of the upper rack are fully seated on the posts of the lower rack before releasing the load, to avoid the risk of toppling caused by improper stacking.

Internal dimensions, dead weight, per-unit load capacity, adjustable-height posts and surface treatment are all defined per project. Send your pallet sizes, goods weight and stacking tiers, and our engineering team will confirm the nesting rack specification, stacking load and truck loading quantity for your site. Send your pallet and load details

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.