Plug-In Stack Rack Technical Solution for Tire Storage
derack
Technical solution for a 48 × 48 × 60 in plug-in stack rack: 4,000 lbs per unit, powder-coated or galvanized, with rack dimensions, packing and container loading plan.
Plug-In Stack Rack Technical Solution for Tire Storage
This vertical storage rack solution covers a plug-in stack rack built for tire and general cargo storage: internal size 48 × 48 × 60 inches, 4,000 lbs load per unit, powder-coated or galvanized finish, with rack dimensions, packing and container loading plan, implementation schedule, after-sales plan and risk assessment.

Customer Requirement Analysis:
1. Plug-in stack rack, internal dimensions 48 × 48 × 60 inches,
2. Load capacity 4,000 lbs per unit
3. Surface finish: powder coating or galvanized
4. For storing tires and similar goods

Technical Solution Description
Appearance of the rack


Material and basic dimensions of the rack: self-weight 70 kg (excluding the plywood deck); the plywood deck weighs about 10 kg

Top view, with posts

Top view, without posts, internal dimensions 1220 × 1220 mm

Internal height 1524 mm, 60 inches

Overall height and the height at which the base is inserted into the sleeve

Stacking effect
Packing and Container Loading Plan

During transport we stack the racks in a similar half-rotated pattern so as to make the best possible use of vehicle space. Each stack holds 25–30 stack racks; loaded in the half-rotated pattern, with a maximum footprint of 2000 × 2000, a 20 ft container can hold 75 sets and a 40 ft high-cube container can hold 150 units.
Packing reference style:



The products are packed with stretch film plus strapping. This method does not generate extra packing costs, but it cannot fully guarantee against damage to the surface coating caused by impact between products during transport. A more reliable wooden crate packing is also available; the wooden crates are calculated into the product cost strictly at our purchase price. (Wooden crate price = RMB 90 / m²)
Implementation Plan and Schedule
The sales representative can provide this item when the customer has specific quantity and production schedule requirements.
After-Sales Service Plan
None
Risk Assessment
The product must not be exposed to rain for long periods. Prolonged rain causes water to accumulate inside the tubes, which leads to internal rusting and rust water flowing out, affecting the appearance of the product.
When the forklift inserts and lifts the forks, operate at a steady speed. Do not force the forks in, otherwise the product may be damaged and its use affected.
Regularly check the base, posts and other components for bending, deformation or broken welds, so as to avoid hazards caused by problems with rack components.
During static stacking, the operator must confirm that the feet of the upper rack are fully seated on the posts of the lower rack before withdrawing. This avoids the danger of stack collapse caused by improper stacking.
Send us your internal dimensions, required load per unit and preferred finish. We will come back with a vertical storage rack layout, packing method and container loading estimate for your project. Contact Steel Pallet