Plug-In Stackable Rack Technical Solution: 1300 × 1300 × 1255 mm, 1.5 t Dynamic Load, 3-Layer Stacking
derack
Technical solution for a plug-in stackable rack project: 1300 × 1300 × 1255 mm, 52 kg, 1.5 t dynamic load, 3-layer stacking, 240 units per 40 ft high-cube container.
Plug-In Stackable Rack Technical Solution: 1300 × 1300 × 1255 mm, 1.5 t Dynamic Load, 3-Layer Stacking
A plug-in stack rack solution built around the customer's requirement for removable-post stack racks: 1300 × 1300 × 1255 mm external and 1120 × 1120 × 1100 mm internal dimensions, 52 kg self-weight, 1.5 t dynamic load stacked three layers high, electrostatic powder coating, and 240 units per 40 ft high-cube container.

Customer Requirement Analysis:
The customer requires plug-in stack racks; refer to the dimensions in the specification table below;
Dynamic load 1.5 t, stacked in 3 layers;
Surface: electrostatic powder coating; the container loading quantity for a 40 ft high-cube container is required

Technical Solution Description
The preliminary design form of the plug-in rack is shown in the figure below

The external dimensions of the rack are 1300 × 1300 × 1255 mm, the internal dimensions are 1120 × 1120 × 1100 mm, and the self-weight is 52 kg


Internal height 1100 mm, fork entry height 105 mm

After loading, the stack racks can be stacked in three layers

When empty, the posts can be pulled out for stacking, saving storage space
Packing and Container Loading Solution
After stacking, 40 units per stack; the dimensions of a single stack are 1850 × 1850 × 2550 mm
A 40 ft high-cube container can hold 240 units
Reference packing style:



The product is packed with stretch film plus strapping. This method does not generate additional packing costs, but it cannot fully guarantee against surface coating damage caused by contact between products during transport. A more robust wooden crate packing is also available, and the wooden crate is calculated into the product cost exactly according to our purchase price. (Wooden crate price = 90 CNY/㎡)
Implementation Plan and Schedule
The sales representative can provide this item when the customer has specific quantity and production schedule requirements
After-Sales Service Plan
None
Risk Assessment
When the forklift enters and lifts the forks, the operation must be carried out at a steady speed; do not pick the rack violently, so as to avoid damage to the product and its use.
Regularly check the base, posts and other parts for bending, deformation, open welds and other problems, to avoid danger caused by problems with rack components.
During static stacking, the operator must confirm that the feet of the upper rack are fully seated on the posts of the lower rack before releasing it. This avoids the danger of toppling caused by improper stacking.
Send us your dimensions, dynamic load, stacking layers and target container loading quantity, and our engineering team will work out the rack specification, packing method and loading plan for your project. Send your project details