🏭 Steelpallet · Factory Direct · OEM Available

Inverted Rerack (Stacking Rack) Technical Solution for Two-Level Stacking of Pallet Loads

Inverted Rerack technical solution with 1250 × 1150 × 1700 mm inner size, cross braces aligned to 1100 × 1100 mm pallet legs, and 64-unit container loading plan.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Inverted Rerack (Stacking Rack) Technical Solution for Two-Level Stacking of Pallet Loads
Technical Solution

Inverted Rerack (Stacking Rack) Technical Solution for Two-Level Stacking of Pallet Loads

A source-bound engineering solution for inverted Rerack units with 1250 × 1150 × 1700 mm internal dimensions, matched to 1100 × 1100 mm pallets at 1000 kg per pallet and goods. Two-level rack stacking with three tiers of goods, cross braces aligned to pallet support legs, and empty nesting that loads 64 Reracks into one 40-foot high-cube container.

Rerack stacking rack for two-level rack stacking with three tiers of goods

Customer requirement analysis:

Inverted Rerack units are required

The matching pallet size is 1100 (fork entry) × 1100 mm, and the total height of goods plus pallet is 1600 mm

The weight of pallet plus goods is 1000 kg

The racks are stacked in two levels, with goods arranged in three tiers

Rerack stacking rack for two-level rack stacking with three tiers of goods

Technical solution description

Based on the customer's requirement description, we designed the inverted Rerack with internal dimensions of 1250 × 1150 × 1700; the specific solution is shown in the figures below

Rerack inner dimension drawing at 1250 x 1150 x 1700 mm
Rerack technical solution layout with 1250 x 1150 x 1700 mm inner dimensions

The Rerack posts use 50 × 2.5 square tube, and the remaining parts use 50 × 1.5 square tube

Rerack frame using 50 x 2.5 mm square tube posts and 50 x 1.5 mm square tube for the remaining parts

Illustration of the three-tier goods stacking result

Rerack three-tier goods stacking arrangement

The cross braces of the rack are positioned according to the support legs of the 1100 × 1100 mm pallet, so as to prevent the pallet support legs from deforming, especially on wooden pallets

Rerack cross brace positions matched to the support legs of 1100 x 1100 mm pallets

When 8 racks are transported, 4 of them need to be nested together, and the nested dimensions are shown in the figure

Packing and loading plan

Transport is carried out in 40-foot high-cube containers; the Reracks can be nested empty to save transport space, and with this stacking method a single container can load 64 Reracks

Empty Rerack units nested four together for transport
Nested Rerack stack dimensions for container transport
Rerack nesting arrangement for loading 64 units in a 40ft high cube container

The product is packed with bubble film plus strapping; this method does not generate additional packing costs, but it cannot fully guarantee that the surface coating will not be damaged by collisions between products during transport. A more reliable wooden crate packing can also be selected, and the packing crate is fully calculated into the product cost at our purchase price. (Wooden crate price = 90 CNY per square metre) Wooden crates are not recommended for this product, since they waste a great deal of container space; if wooden crates are used for loading, a 40-foot container can hold about 30 units

Implementation plan and lead time

The sales representative can provide this content when the customer has specific quantity and production lead time requirements

After-sales service plan

None

Risk assessment

The product must not be exposed to rain for long periods; prolonged rain exposure causes water to accumulate inside the tubes, which leads to internal rust and rust water flowing out, affecting the product appearance.

Do not handle the product with force when forklifting, as this will deform the forklift entry pockets.

Regularly check the welding and the safety condition of the components of the rack body to avoid creating hazards.

During static stacking, the operator must confirm that the upper load has truly landed completely on the lower rack before withdrawing, so as to avoid the danger of a stack collapse caused by improper stacking

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.