Rerack and Strack Stack Racks for 1200 × 1200 × 1200 mm Cargo at 1.5 t, Stacked 3 High
Technical solution for Rerack and Strack stack racks for 1200 × 1200 × 1200 mm cargo at 1.5 t stacked 3 high: inner size 1300 × 1300 × 1350 mm, 56 Strack or 88 Rerack units per 40 ft high cube, packing and risk control.
Rerack and Strack Stack Racks for 1200 × 1200 × 1200 mm Cargo at 1.5 t, Stacked 3 High
Project solution for a customer handling 1200 × 1200 × 1200 mm loads of 1.5 t in three-layer stacking: both inverted (Rerack) and upright (Strack) stack racks, with inner size 1300 × 1300 × 1350 mm, unit weights of about 72 kg and 58 kg, container loading of 56 Strack or 88 Rerack units per 40 ft high cube, and the packing and risk-control measures that go with them.

Customer requirement analysis:
Both inverted stack racks (Rerack) and upright stack racks (Strack) are required.
Cargo size 1200 × 1200 × 1200 mm, weight 1.5 t.
Stacking height: 3 layers.
Technical solution description
Based on the customer's requirement description, we designed the Strack with an inner size of 1300 × 1300 × 1350 mm. The detailed solution is shown in the drawing below.

Product appearance and materials used; self weight approximately 72 kg.

Front view; the inner height of the rack is 1350 mm.

Top view; the outer length and outer width of the rack are 1400 mm and 1350 mm respectively.
Based on the customer's requirement description, we designed the Rerack with an inner size of 1300 × 1300 × 1350 mm. The detailed solution is shown in the drawing below.

Product appearance and materials used; self weight approximately 58 kg.

Front view; the inner height of the rack is 1350 mm.

Top view; the outer length and outer width of the rack are 1400 mm and 1350 mm respectively.
Packing and container loading plan
A 40 ft high cube container can hold 56 Strack units or 88 Rerack units.



The products are packed with bubble film plus strapping. This method does not create additional packing cost, but it cannot fully guarantee against damage to the surface paint film caused by contact between products during transport. A more reliable wooden crate packing is also available, and the crate cost is calculated into the product cost at our purchasing price. Wooden crates are not recommended for this type of product, as they waste a great deal of container space.
Implementation plan and lead time
This section is provided once the customer has confirmed specific quantities and production lead time requirements.
After-sales service plan
None.
Risk assessment
The product must not be exposed to rain for long periods; prolonged rain will cause water to accumulate inside the tubes, which leads to internal rust and rusty water flowing out, affecting the product appearance.
Do not handle the racks roughly with a forklift, as this will deform the forklift entry pockets.
Check the welding and the safety condition of components at regular intervals to avoid danger.
During static stacking, the operator must confirm that the upper cargo has fully landed on the lower rack before releasing it, so as to avoid the danger of a stack collapse caused by improper stacking.
Send us your cargo size, load weight, stacking height and target container loading, and our engineers will return the rack drawing, inner dimensions and packing plan for your review. Request a technical solution