🏭 Steelpallet · Factory Direct · OEM Available

Rerack Stack Racks: Technical Solution for 1200 × 800 mm Pallets and Two-Tier Storage

Technical solution for inverted Rerack stack racks: 1200 × 800 mm pallets, 1800 mm cargo height, two-tier stacking, 100 mm empty clearance, 52 units per 40ft container.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Rerack Stack Racks: Technical Solution for 1200 × 800 mm Pallets and Two-Tier Storage
Technical Solution

Rerack Stack Racks: Technical Solution for 1200 × 800 mm Pallets and Two-Tier Storage

A customer needed inverted stack racks to raise warehouse space utilization: 1200 (fork entry) × 800 mm pallets, 1800 mm cargo plus pallet height, two stacked tiers, and a 100 mm clearance between empty racks for forklift fork thickness. The solution was a Rerack built at 1300 × 900 × 1900 mm internal, 1400 × 950 mm external, 1980 mm overall height and approximately 60 kg self-weight, with empty stacking, loaded stacking, packaging and container loading confirmed.

Request a Rerack dimension review

Rerack custom stack rack design drawing for 1200 x 800 mm pallet

Customer Requirement Analysis:

The customer needs inverted stack racks to improve warehouse space utilization.

The matching pallet size is 1200 mm (fork entry) × 800 mm, and the combined height of the goods plus the pallet is 1800 mm.

When stacked empty, a clearance of 100 mm is required between racks so that the thickness of the forklift forks can be accommodated.

Two tiers of goods are stacked.

Technical Solution Description

Based on the customer's requirement description, we designed the Rerack with internal dimensions of 1300 × 900 × 1900 mm. The specific solution is shown in the drawings below.

Rerack custom stack rack design drawing for 1200 x 800 mm pallet

Product appearance and materials; self-weight approximately 60 kg.

Rerack stack rack appearance and material configuration, approx. 60 kg self-weight

Front view; the total height of the rack is 1980 mm.

Rerack front elevation drawing showing 1980 mm total rack height

Top view; the outer length and outer width of the rack are 1400 mm and 950 mm respectively.

Empty storage stacking:

Rerack empty stacking arrangement drawing for storage
Rerack empty stacking view with 100 mm gap between racks for forklift forks

For empty stacking we adjusted the height of the bottom spacer tubes so that the gap between racks becomes 100 mm.

Effect after loading:

Rerack loaded stacking arrangement with two tiers of goods
Rerack loaded stacking side view

Packaging and Container Loading Solution

Rerack packaging method drawing
Rerack container loading stacking layout drawing

To make maximum use of the container space, the racks are loaded in this stacking pattern, which allows 52 units to be loaded in a 40ft container.

Rerack 40ft container loading plan with 52 units
Rerack container loading arrangement detail
Rerack container loading side view detail

The product is packed with bubble film plus strapping. This method does not generate any additional packaging cost, but it cannot fully guarantee that the surface coating will not be damaged by collisions between products during transport. A more reliable wooden crate can also be selected, and the crate is fully calculated into the product cost at our purchasing price (wooden crate price = RMB 90 per m²). Wooden crates are not recommended for this type of product because they waste a great deal of container space; if wooden crates are used, the quantity loadable in a 40ft container is approximately 30 units.

Implementation Plan and Lead Time

The sales representative can provide this content once the customer has specific quantity and production lead-time requirements.

After-sales Service Plan

None

Risk Assessment

The product must not be exposed to rain for long periods. Prolonged rain exposure causes water to accumulate inside the tubes, which leads to internal rusting and rust water flowing out, affecting the product appearance.

The racks must not be forked roughly, as this will deform the fork entry openings.

Regularly check the welding and the safety condition of the components on the rack frame to avoid hazards.

During static stacking, the operator must confirm that the upper goods have fully landed on the lower rack before withdrawing the forklift, in order to avoid the danger of stack collapse caused by improper stacking.

Tell us your pallet size, the combined cargo plus pallet height, the number of tiers you want to stack and the clearance needed between empty racks, and we will confirm the Rerack internal and external dimensions, fork entry details, packaging option and container loading quantity for your project. Get a Rerack quotation

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.