Stackable Rack Technical Solution for Lifeboat Storage
derack
Project technical solution: movable stackable racks replacing beam racking for lifeboat storage — three lifeboats per rack, five layers within 6 m, 1550 × 2820 × 1000 mm rack, 136 kg weight, 40ft high-cube loading plan.
Stackable Rack Technical Solution for Lifeboat Storage
A project case in which beam racking is replaced by movable stackable racks: three lifeboats per rack, five stacking layers within 6 m total height, a 1550 × 2820 × 1000 mm rack, a 136 kg pallet weight and a 40ft high-cube container loading plan.

Customer requirement analysis:
The customer wants to replace the existing beam racking with stackable racks to store lifeboats, so that the racks can be moved freely.
One stackable rack needs to hold three lifeboats.
Total stacking height ≤ 6 m.
A parameter table of the lifeboats is provided.

The existing storage method for small-size lifeboats

The customer's lifeboat specification table
Technical solution description
Composition of the stackable rack:


The stackable rack consists of two parts, the upright frame and the base. The upright frame is inserted into the sockets of the base to become the guardrail and the stacking support column of the rack.
Basic dimensions of the rack:


To meet the requirement of the largest lifeboat, the width of the rack is 1550 mm, the inner length is 2820 mm and the height is 1000 mm.


Effect of placing the largest lifeboat into the rack


With the rack designed at the current dimensions, the height of five stacked layers is 5662 mm, and the total height is ≤ 6 m, which is a suitable number of stacking layers.
Product material and weight:

The total weight of the pallet is 136 kg.
Surface treatment:

Powder coating – Advantages: many color options, relatively low coating price; Disadvantages: moderate anti-rust performance, cannot be exposed to rain for a long time.

Hot-dip galvanizing – Advantages: better anti-corrosion performance than powder coating, especially because the inside of the tubes is also protected, so rain exposure will not cause rusty water to run out; Disadvantages: relatively higher price, and galvanizing process holes have to be drilled.
Packaging and container loading plan


48 units can be loaded in a 40ft high-cube container.



The products are packed with stretch film plus strapping. This method does not generate extra packaging cost, but it cannot fully guarantee that the surface coating will not be damaged by collisions between products during transport. A more reliable wooden crate packing can also be selected; the packing crate is fully calculated into the product cost according to our purchase price. (Packing crate price = 90 RMB/㎡)
Implementation plan and lead time
The salesperson can provide this content when the customer has specific quantity and production lead time requirements.
After-sales service plan
None
Risk assessment
The forklift must be operated at a uniform speed when entering and lifting the forks. Do not fork aggressively, so as to avoid damage to the product and its use.
Regularly check the base, uprights and other components for bending, deformation, open welds and other problems, so as to avoid danger caused by problems of the rack components.
During static stacking, the operator must confirm that the feet of the upper rack have indeed fully rested on the uprights of the lower rack before the forks are withdrawn. This avoids the danger of toppling caused by improper stacking.
Send us your equipment dimensions, the quantity per rack and your site height limit. We will size the rack, the stacking layers, the surface treatment and the container loading plan against your project. Contact Steel Pallet