1500 kg Stacking Rack Solution for Palletized Goods with 3-Tier Stacking
derack
Technical stacking rack solution for 1200×1200×1200 mm cargo on wooden pallets: up to 1500 kg per rack, 3-tier stacking, reinforced bottom braces, 1460 mm height, 64 kg dead weight.
1500 kg Stacking Rack Solution for Palletized Goods with 3-Tier Stacking
A stackable rack solution for 1200×1200×1200 mm cargo stored on wooden pallets: not more than 1500 kg per rack, 3-tier stacking, reinforced bottom cross bracing, 1460 mm total height and plug-in uprights for transport and idle storage.

Customer Requirement Analysis:
The customer needs stacking racks to store goods that stay on their wooden pallets.
The load capacity of a single stacking rack shall not be more than 1500 kg.
Three-tier stacking is required.
Cargo size is taken as 1200×1200×1200 mm.
Parameter table
| No. | Item | Parameter value | Remarks |
|---|---|---|---|
| 1 | Cargo storage dimensions | 1200×1200×1200mm | L×W×H |
| 2 | Stacking rack load capacity | Less than 1500kg | |
| 3 | Stored together with the pallet | Yes | |
| 4 | Stacking tiers | 3 tiers | |
| 5 | Surface treatment | Electrostatic powder coating |
Technical Solution Description
Based on these requirements, we have produced the following design.

This shows the basic dimensions and the material specification of the rack. To prevent the wooden pallet from being damaged by an excessively concentrated load, we reinforced the bottom cross braces by adding 18 pieces of angle steel as auxiliary support. The dead weight of the stacking rack is 64 kg.

The total height of the stacking rack is 1460 mm, and the usable storage height is 1300 mm.

The internal dimension on each of the two sides is 1300 mm, so when storing cargo 1200 mm wide there is a 50 mm clearance on each side, which makes forklift operation easier.

The four upright posts use a plug-in structure and can be pulled out during transportation or when the racks are idle.

The yellow block represents the cargo, with dimensions of 1200×1200×1200 mm; this is the effect after loading.

Stacking racks can be stacked. This is the effect after three-tier stacking.
Similar product examples

Horizontal sheet rack: a standard 3000×1500mm steel plate storage rack, used to store steel plates after leveling.

Steel plate pallet remover: used to remove the wooden pallet under raw steel plate material, and part of the matching equipment for the horizontal sheet rack.

Motorcycle stacking rack: used to transfer and store motorcycles.

Pipe stacking rack: also a plug-in structure, used to store metal or plastic pipes of 6m.
Packaging and Loading Plan
After 12 units are rotated and stacked, the package size is 1900×1900×1500mm.
Packaging reference style:


The product is packed with stretch film plus strapping bands. This method does not create extra packaging cost, but it cannot fully guarantee that the surface coating film will not be damaged by collision between products during transportation. A more reliable wooden crate packaging is also available, and the crate is calculated into the product cost strictly at our purchase price. (Wooden crate price = 90 RMB/m²)
Items requiring further discussion
We have prepared a preliminary solution design for you. You may also have better ideas and suggestions; we can hold an online meeting to discuss how they would work, and to see whether further adjustment is needed. We look forward to studying this together with you.
Send us your cargo size, the load per rack and the number of stacking tiers you need, and our engineering team will come back with a rack layout, loading check and packaging plan for your project. Contact our engineering team