Insert-and-Pull Steel Coil Storage Rack: Model, Dimensions and Loading Plan
derack
Case review of an insert-and-pull steel coil storage rack: 3D model, overall, side and top dimensions, material specification, stacking effect and container loading plan.
Insert-and-Pull Steel Coil Storage Rack: Model, Dimensions and Loading Plan
A coil handling project review: an insert-and-pull stackable rack for steel coils, rebuilt as a 3D model with overall, side and top dimensions, material specification taken from the customer drawing, plus stacking, packing and container loading data.

Customer requirement analysis:
The customer requires an insert-and-pull stackable rack for storing coils, as shown below.




Technical solution description
Based on the drawings above, we rebuilt the three-dimensional model, as shown below.


The basic overall dimensions are identical to the 2D drawing you provided.

This is the side dimension.

This is the top view and the outer dimensions of the rack.

This is the stacking effect.

The material used for the steel coil rack follows the material specification configuration on the reference drawing.

This is the three-dimensional effect after stacking in empty condition.
Similar product examples

Horizontal plate rack: a standard 3000×1500 mm steel plate storage rack, used to store steel sheets after leveling.

Steel plate wooden pallet remover: used to remove the wooden pallet under raw steel plate material; it is an accessory product for the horizontal plate rack.

Motorcycle stackable rack: used for turnover and storage of motorcycles.

Pipe stacking rack: the same insert-and-pull structure, used to store 6 m metal or plastic pipes.
Packing and container loading plan
90 units can be loaded in a 40 ft high cube container, and 42 units in a 20 ft container.
Packing reference:


The product is packed with stretch film plus strapping. This method does not generate extra packing cost, but it cannot fully guarantee that the surface paint film will not be damaged by collisions between products during transport. A more reliable wooden crate packing is also available, and the crate is accounted for in the product cost at our procurement price.
Items for further discussion
We have prepared a preliminary solution design for you. You may also have better ideas and suggestions; we can hold an online meeting to discuss how they work together and whether further adjustment is needed. We look forward to working through this with you.
Send us your coil dimensions, stack height and container plan. We will confirm the rack layout, material specification and packing method against your drawing before quoting. Send your drawing for review