Vertical Pipe Storage Rack for 12 m Pipes: 4-Tier Stacking Technical Solution
derack
Technical solution for storing 12000 mm pipes of 4-6 inch at 220 kg each: plug-in A-frame vertical pipe rack, 4-tier stacking, forklift channel, 8 units per 40 ft high cube.
Vertical Pipe Storage Rack for 12 m Pipes with 4-Tier Stacking
A plug-in A-frame pipe rack concept for 12000 mm pipes of 4 to 6 inch diameter at 220 kg each: dedicated forklift channel, pin-reinforced second-tier cantilever arms, bolted uprights for container transport, and 8 units per 40 ft high cube container.

Customer Requirement Analysis:
The customer needs to transport and store pipes. The specific requirements are listed below.

Requirement parameter table
| No. | Item | Parameter value | Remarks |
|---|---|---|---|
| 1 | Length of stored pipes | 12000 mm | |
| 2 | Stacking tiers | 4 tiers | |
| 3 | Pipe specification | 4 inch to 6 inch | |
| 4 | Maximum weight per pipe | 220 kg | |
| 5 | Surface treatment | Not yet determined |
Technical solution description
Based on the information in the table and the description above, we have produced a preliminary concept for this pipe rack, as shown below.

The whole unit uses a plug-in structure. Six upright posts on each side can be inserted and removed. To suit container transport, the overall length is 11000 mm and the internal storage space is 1100 mm; after deducting the space taken by the central uprights, six 6-inch pipes can be stored.

Total width 1300 mm

An independent forklift channel is provided. These are the specific dimensions of the forklift channel.

The second-tier cantilever arms and the uprights are joined with pins passing through them, which increases the load capacity of the second-tier cantilevers. The central uprights are bolted to the base and can be dismantled for transport.

This is the dismantled state, split into the cantilever-upright section, the uprights and the base.

This is the material configuration of the pipe rack; total weight 950 kg.

This is the loading result with 16 pipes.

There is still a certain gap between the pipes, and rubber pads can be used to separate them.

This is the total height after stacking four tiers.

This is the three-dimensional effect after stacking.
Packing and container loading plan
Eight units can be loaded in a 40-foot high cube container.
Packing reference style:


The product is packed with stretch film plus strapping. This method generates no extra packing cost, but it cannot fully guarantee that the paint film surface will not be damaged by contact between products during transport. A more reliable wooden crate packing is also available, and the wooden crate cost is calculated into the product cost according to our purchase price. (Wooden crate price = 90 RMB per square metre)
Items requiring further discussion
We have prepared a preliminary design for you. You may also have better ideas and suggestions. We can hold an online meeting to discuss how they can help and whether further adjustments are needed. We look forward to working through this together with you.
Send us your pipe length, diameter, weight per pipe and required stacking tiers. We will check the 11000 mm plug-in frame, the forklift channel dimensions and the 40 ft high cube loading plan against your site. Request a Design Review