Vertical Pipe Storage Rack Built to Stack with Existing Plug-in Frames
derack
Technical solution for a vertical pipe storage rack built to the customer's existing rack size: 5544 × 1305 × 1356 mm, 228 kg, stackable with current plug-in frames, full-length tube main beam.
Vertical Pipe Storage Rack Built to Stack with Existing Plug-in Frames
A vertical storage rack engineered to the customer's existing rack dimensions so both generations stack together: outer size 5544 × 1305 × 1356 mm, 228 kg dead weight, through-to-base upright posts instead of pin joints, and a single full-length steel tube main beam.

Customer requirement analysis:
The photo below shows the plug-in stackable rack the customer is currently using.
We are asked to build to this size. The key point is that the rack must stack together with the frames the customer already has.

Technical solution description
The preliminary design of the pipe rack is shown in the drawing below.

The outer dimensions of the rack are 5544 × 1305 × 1356 mm, with an overall dead weight of 228 kg.

Side view

Top view

Detailed dimension drawing (high-resolution PDF drawing attached)
Two changes that need explanation
1. Plug-in upright post structure

The upright post and base pin design on the drawing provided by the customer.

Our upright post runs through to the bottom of the base. In use the post is always loaded downwards, so we normally add no further fixing at this point.

This is the actual result of a similar product in stacked use.
2. Main beam made of a single full-length steel tube

The blue part is the main beam. It is a single full-length steel tube, which prevents problems such as weld fracture and deformation of the base post profile.

This is what happened previously with a welded main beam. The customer's rack was severely jolted during forklift transport, which tore the base post tube. Since then all our products have used full-length material as the main beam to avoid similar problems.
Packing and container loading plan
A standard 40 ft high cube container holds 22 units; a 20 ft container holds 10 units.
Packing reference style:



Products are packed with stretch film plus strapping. This method adds no extra packing cost, but it cannot fully guarantee that the paint film will be free of scratches caused by contact between products during transport. A more reliable wooden crate packing can also be used; the crate is calculated into the product cost entirely at our purchase price. (Wooden crate price = 90 RMB/㎡)
Implementation plan and lead time
The salesperson can provide this item once the customer has specific quantity and production lead time requirements.
After-sales service plan
None
Risk assessment
When entering and lifting with the forks, operate the forklift at an even speed. Do not fork roughly, otherwise the product may be damaged and its use affected.
Regularly check the base, upright posts and other components for bending, deformation, weld cracking and similar problems, so that danger caused by faulty rack components is avoided.
During static stacking, the operator must confirm that the feet of the upper rack have fully landed on the upright posts of the lower rack before letting go. This avoids the danger of the stack toppling through improper stacking.
Send us the dimensions, stacking height and load of the rack frames you are using now. We will confirm upright post structure, main beam specification, container loading quantity and packing method against your handling conditions. Request a technical proposal