🏭 Steelpallet · Factory Direct · OEM Available

Vertical Pipe Storage Rack Technical Solution for 7 m Plastic Pipes
derack

Technical solution for a stackable vertical pipe storage rack: 5520×1130×1120 mm, 1500 kg dynamic load, three-high stacking, two rows per 40 ft HC container.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Vertical Pipe Storage Rack Technical Solution for 7 m Plastic Pipes
Technical Solution / Pipe Storage Racking

Vertical Pipe Storage Rack Technical Solution for 7 m Plastic Pipes

A stackable steel rack solution for 7 m plastic pipes, with container-optimised 1130 mm width, 1500 kg dynamic load per rack, three-high stacking and verified pipe counts for Φ160, Φ100 and Φ63 mm.

Request a quote for your pipe dimensions

derack technical source image

Customer Requirement Analysis:

The customer needs to store plastic pipes 7 m long;

The dimensions only need to suit 7 m long pipes; the width is designed so that as many units as possible can be loaded into a shipping container;

The stackable rack can be stacked three high;

The pipe load stored in a single rack is 1500 kg;

Loading quantities are required for pipe diameters of 160 mm, 100 mm and 63 mm.

Parameter Table

No. Item Parameter Value Remarks
1 Pipe length 7 m
2 Pipe diameter 160 mm, 100 mm, 63 mm
3 Rack dimensions Standard design, sized to meet maximum container loading requirements
5 Rack load capacity Dynamic load 1500 kg Stacked three high
6 Surface treatment Electrostatic powder coating

Technical Solution Description

The preliminary design of the pipe rack is shown in the figures below.

derack technical source image

The external dimensions of the rack are 5520 × 1130 × 1120 mm, with a self-weight of 240 kg.

derack technical source image

The fork entry openings measure 180 × 80 mm.

derack technical source image

The centre distance between the fork pockets is 900 mm. The rack width is designed around the 2300 mm internal width of a container: at 1130 mm wide, two rows of racks can be placed inside one container, which maximises the use of container space and reduces transport cost. The fork pocket centre distance can be adjusted to your requirements; 900 mm here is a reference value only and the actual requirement governs.

derack technical source image

Loaded condition, shown here with 6 m long pipes.

derack technical source image
derack technical source image

Three-high stacking result.

derack technical source image

Empty (unloaded) stacking result.

derack technical source image
derack technical source image
derack technical source image

Φ160 pipes: 27 pipes per rack.

Φ100 pipes: 77 pipes per rack.

Φ63 pipes: 203 pipes per rack.

Packaging and Container Loading Plan

A standard 40 ft high cube container can carry 40 units.

Packaging reference:

derack technical source image
derack technical source image
derack technical source image

The product is packed with stretch film plus strapping. This method does not add extra packaging cost, but it cannot fully prevent surface coating damage caused by contact between units during transport. A more reliable wooden crate option is also available, and the crate is costed into the product price in full accordance with our purchase price (wooden crate price = CNY 90 / m²).

Implementation Plan and Lead Time

The sales representative can provide this section once the customer has confirmed the specific quantity and production schedule requirements.

After-Sales Service Plan

Not applicable.

Risk Assessment

When the forklift enters and lifts the rack, operate at a uniform speed; do not fork aggressively, otherwise the product may be damaged and its service life affected.

Check the base, uprights and other components regularly for bending, deformation, cracked welds or similar problems, so that no danger is caused by component failure.

During static stacking, the operator must confirm that the feet of the upper rack are fully seated on the uprights of the lower rack before withdrawing. This avoids the risk of a stack collapse caused by improper stacking.

Send us your pipe length, diameter mix and load per rack, and we will confirm the rack dimensions, the pipe count per rack and the container loading plan for you. Contact Steel Pallet

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.