Vertical Pipe Storage Rack Technical Solution: 6–8 m Pipes, 3-Tier Stacking
derack
Technical solution for an A-frame vertical pipe storage rack handling 6–8 m pipes: 5,520 × 1,130 × 1,236 mm frame, 3-tier stacking to 3,656 mm, and up to 40 units per 40 ft high-cube container.
Vertical Pipe Storage Rack for 6–8 m Pipes
An A-frame vertical pipe storage rack designed around 6–8 m pipe lengths, with a 5,520 × 1,130 × 1,236 mm rack size, three-tier stacking to 3,656 mm total height, and container loading of up to 40 units in a standard 40 ft high-cube container.

Customer requirement analysis:
The customer wants to learn about a stackable rack for storing pipes that can be inserted and withdrawn; the stored pipe lengths are 6 m–8 m, and the height and width can be designed on a reasonable basis.
It is preferable to load as many units as possible into a container.

Technical solution description
The preliminary design form of the pipe rack is shown in the figure below

The outer dimensions of the rack are 5,520 × 1,130 × 1,236 mm

The effect after loading; the figure shows 6 m long pipes


The effect of three-tier stacking; after three-tier stacking the total height is 3,656 mm
Detail sample drawing

Packing and container loading plan
Stacked empty in 8 tiers, height 2,080 mm; 32 units can be loaded in the 40 ft container shown below
40 units can be loaded in a standard 40 ft high-cube container

Packing reference style:



The product is packed with stretch film plus strapping bands. This method does not generate additional packing costs, but it cannot fully guarantee that the surface coating film will not be damaged by collisions between products during transport. A more reliable wooden crate packing is also available, and the packing crate is fully calculated into the product cost at our purchase price. (Wooden crate price = 90 CNY / m²)
Implementation plan and lead time
The salesperson can provide this content when the customer has specific requirements for quantity and production lead time
After-sales service plan
None
Risk assessment
When the forklift enters with the forks and lifts them, the operation must be carried out at a uniform speed. Do not fork violently, so as to avoid damage to the product and any impact on its use.
Regularly check the base, uprights and other components for bending, deformation, cracked welds and other problems, so as to avoid danger caused by problems with the rack components.
During static stacking, the operator must confirm that the feet of the upper rack have indeed fully rested on the uprights of the lower rack before releasing it. Avoid the danger of toppling caused by improper stacking
Tell us your pipe lengths, stack height limits and container type. We will match the rack size, stacking tiers and packing method to your shipment, and quote the wooden crate option separately if you need full surface protection. Contact our engineering team