🏭 Steelpallet · Factory Direct · OEM Available

Vertical Storage Rack for 4 m Plastic Pipes: 1200 kg Three-High Technical Solution
derack

Technical solution for a hot-dip galvanized vertical pipe storage rack: 4000 mm pipes of 100 mm diameter, 145 pipes per rack, 1200 kg load, three-high stacking, 20 racks per 20ft container.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Vertical Storage Rack for 4 m Plastic Pipes: 1200 kg Three-High Technical Solution
Technical Solution

Vertical Pipe Storage Rack for 4 m Plastic Pipes, 100 mm Diameter

A reinforced A-frame pipe rack engineered for 4 m plastic pipes: about 145–150 pipes per rack, 1,200 kg pipe load stacked three high, a single full-length main beam without welded joints, and hot-dip galvanized finish for outdoor use.

Request this rack specification

derack technical source image

Customer Requirements Analysis

The customer wants to store square-section plastic pipes 4 m long with a diameter of 100 mm.

The storage quantity of pipes on a single rack is about 150 pipes.

The racks previously in use had broken in service, so the main beam must be reinforced beyond the standard section.

The load of the whole rack, calculated from the pipe quantity, is about 1,200 kg.

With a properly designed rack structure, about 20 sets of pipe racks are needed.

Parameter Table

No. Item Parameter Value Remarks
1 Pipe length 4000mm
2 Pipe diameter 100mm
3 Pipe material Plastic
4 Storage quantity of pipes per rack About 150 pipes
5 Total pipe weight per rack 1200kg Stacked three high
6 Surface treatment Hot-dip galvanized Zinc coating thickness ≥40μm

Technical Solution Description

Based on the description above, we have made a preliminary design of the rack structure, as shown in the figures below.

derack technical source image
derack technical source image

To meet the load-bearing requirement of the rack, the main beam is made of 120×60×3.75mm rectangular tube, one continuous full-length piece with no welded joint; the dead weight of the rack is about 218kg.

derack technical source image

The total height of the rack is 1270mm and the usable storage height is 980mm. Four tubes with a height of 60mm are fitted under the base so that ropes can be passed through or forks can enter.

derack technical source image

The total length of the rack is 2900mm and the total width is 1735mm; the centre distance of the fork entry openings is 930mm.

derack technical source image

With the current dimensions, one rack can store 145 pipes of 100mm diameter.

derack technical source image

The racks can be stacked three high, with sufficient space reserved for stacking and for fork entry.

derack technical source image

This is the three-dimensional view.

derack technical source image

When the racks are idle they can also be stacked together like this, which also saves space during transport.

Stacking foot dimensions and actual product display:

derack technical source image

This is the stacking foot used on the rack.

derack technical source image

The surface is hot-dip galvanized. Hot-dip galvanizing gives better corrosion resistance than electrostatic powder coating, especially for outdoor use: the galvanizing process also protects the inside of the tube, so rainwater entering the tube will not cause rust.

Packaging and Loading Plan

derack technical source image

Empty racks can be stacked eight layers high at a height of 2165mm, and a 20-foot container can load 20 pipe racks.

Packaging reference style:

derack technical source image
derack technical source image
derack technical source image

The products are packed with stretch film plus strapping. This method creates no additional packaging cost, but it cannot fully guarantee against damage to the surface coating caused by collisions between products during transport. A more reliable wooden crate packing can also be selected, and the wooden crate is calculated into the product cost strictly at our purchasing price. (Wooden crate price = RMB 90 / ㎡)

Implementation Plan and Lead Time

The sales representative can provide this content once the customer has specific quantity and production lead-time requirements.

After-Sales Service Plan

None

Risk Assessment

The forklift must enter and lift the forks at a uniform speed, without rough handling, so that the product is not damaged and its use is not affected.

Regularly inspect the base, uprights and other components for bending, deformation or open welds, to avoid danger caused by problems with rack components.

During static stacking, the operator must confirm that the feet of the upper rack have fully landed on the uprights of the lower rack before releasing the load, to avoid the danger of a collapse caused by improper stacking.

Send us your pipe length, diameter, material, quantity per rack and required stacking height. We will confirm the main beam section, overall rack dimensions and container loading plan for your project. Contact our engineering team

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.