Vertical Storage Rack for Door Panel Storage: Two-Size Technical Solution
derack
Technical solution for a plug-in, stackable vertical storage rack for door panels: two sizes, 98 kg and 120 kg dead weight, three-side fencing, 20 ft container loading and packing plan.
Vertical Storage Rack for Door Panel Storage — Two-Size Technical Solution
A plug-in, stackable vertical storage rack for door panel storage, quoted in two sizes: 98 kg and 120 kg dead weight, three-side enclosure, with container loading, packaging and risk control provisions.

Customer Requirement Analysis:
1. Storing door panels; an upright stackable rack had already been custom-made previously.
2. This time the customer took photos of the actual on-site usage, and we re-recommended a product for the customer.
3. The customer agreed with the new solution and needs us to quote two sizes: one matching the internal dimensions of the original upright stackable rack, and the other 70 inches long and 42 inches wide.
4. Normally it is used on three sides; the fence on one side is not used.


The usage result and drawings of the upright stackable racks purchased last time
Technical Solution Description
The product we recommend to the customer

Based on the dimensions required by the customer, we produced designs for the two sizes; the basic style is shown below

This is the rack of the first size





The rack can be divided into three parts, and they are connected to each other with a plug-in structure

This is the material usage; the rack's own weight is 98 kg


The rack can also be stacked two high on its base

This is the effect of two racks stacked together
Below is the rack of the other size




The material usage of this size is the same as the previous one, and the basic structure and function are completely the same; its own weight is 120 kg

Packaging and Loading Plan
Rack products need to be disassembled for transport; one 20 ft container can hold 40 units of the first, smaller rack, and 24 units of the larger rack
Packaging reference style:



The product is packed by stretch film plus strapping. This method does not generate extra packaging cost, but it cannot fully prevent surface paint damage caused by knocks between products during transport. A more reliable wooden crate packing can also be selected; the crate is calculated entirely into the product cost at our purchase price. (Wooden crate price = 90 RMB/㎡)
Implementation Plan and Lead Time
The salesperson can provide this content when the customer has specific quantity and production lead-time requirements
After-Sales Service Plan
None
Risk Assessment
The product must not be exposed to rain for a long time; prolonged rain will cause water to accumulate inside the tubes, which leads to internal rust and rust water flowing out, affecting the product appearance.
Operate the forklift at a uniform speed when entering and lifting the forks; do not fork roughly, so as not to damage the product and affect its use.
Periodically check the base, uprights and other components for bending, deformation or broken welds, so as to avoid danger caused by problems in rack components.
During static stacking, the operator must confirm that the feet of the upper rack are indeed fully seated on the uprights of the lower rack before releasing. Avoid the danger of a toppling stack caused by improper stacking
Send us your door panel or panel-material dimensions, the number of sides that need fencing, the target load per rack and your container plan. We will confirm the rack size, dead weight, packing method and quantity per 20 ft container against this solution. Contact Steel Pallet