🏭 Steelpallet · Factory Direct · OEM Available

Vertical Storage Rack Technical Solution for 6 m and 4 m Plastic Pipes and Coiled Hose
derack

Technical solution for a plug-in vertical storage rack system: 2000 kg racks for 6 m and 4 m plastic pipes, castor versions for transfer, and a fenced 1200 × 1200 mm stack rack for coiled hose.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Vertical Storage Rack Technical Solution for 6 m and 4 m Plastic Pipes and Coiled Hose
Technical Solution · Plastic Pipe Storage

Vertical Storage Rack Solution for 6 m and 4 m Plastic Pipes and Coiled Hose

A plug-in vertical storage rack system rated 2000 kg per rack for 6 m and 4 m plastic pipes, plus a fenced 1200 × 1200 mm stack rack for coiled hose, with castor versions for in-plant transfer and confirmed container loading quantities.

Request a Pipe Rack Quote

derack technical source image

Customer Requirements

1. The customer stores plastic pipes in two lengths, 6 m and 4 m, with a load of 2000 kg.

2. Some of the racks need castors so that the pipes can be moved around.

3. Full coils of flexible plastic hose are currently loaded on wooden pallets, which carries a risk of tipping over. A stack rack with a fence is required, with an internal size of 1200 × 1200 mm.

derack technical source image
derack technical source image

Existing transfer racks and the current method of storing pipes

1. Series Overview

The plug-in rack series is a range of warehouse logistics equipment dedicated to the storage and transfer of pipe-type materials such as plastic pipes and coiled plastic hose. All products in the series use a load-bearing base frame (load platform) welded from profiled steel and plug-in removable uprights. Each rack can be used on its own, or several tiers can be stacked by inserting the uprights into one another, achieving three-dimensional storage and making full use of warehouse space.

The series is finished with electrostatic powder coating, giving good corrosion and rust resistance and a clean, neat appearance. The series contains three products: the plug-in plastic pipe stack rack (for 6 m pipes), the plug-in plastic pipe stack rack (for 4 m pipes) and the plug-in stack rack (for coiled plastic hose). They are widely used for pipe storage and transfer in plastic pipe and hose manufacturing plants, warehouse and logistics centres, and building pipe distribution operations.

2. Series Composition and Parameter Comparison

Table 1 summarises the main applications, suitable materials, rated loads and key dimensions of the three products in the plug-in rack series. All three share the same structural form — a plug-in, demountable design with electrostatic powder coating. The main differences are the material size they accommodate, the overall dimensions and the rated load, so the right specification can be selected according to the material actually being stored.

Table 1 Parameter comparison of the plug-in rack series

Parameter Value / Specification Remarks
Product name Plug-in plastic pipe stack rack (6 m) For 6000 mm long plastic pipes
Product name Plug-in plastic pipe stack rack (4 m) For 4000 mm long plastic pipes
Product name Plug-in stack rack For coiled plastic hose
Rated load 2000 kg/rack (6 m and 4 m stack racks) The stack rack is 500 kg/rack
Surface treatment Electrostatic powder coating Same across the series
Structural form Plug-in, demountable Same across the series

3. Technical Solution for the Plug-in Plastic Pipe Stack Rack (for 6 m Pipes)

(1) Product Overview

The plug-in plastic pipe stack rack (hereinafter “the stack rack”) is warehouse logistics equipment dedicated to the storage and transfer of plastic pipes. The product uses a load-bearing base frame welded from profiled steel and plug-in removable uprights. It can be used on its own, or several tiers can be stacked by inserting the uprights into one another, achieving three-dimensional storage and making full use of warehouse space.

The stack rack is finished with electrostatic powder coating, giving good corrosion and rust resistance and a clean, neat appearance. The rated load is 2000 kg per rack and it is designed to hold plastic pipes 6000 mm long. It is widely used for pipe storage and transfer in plastic pipe manufacturing plants, warehouse and logistics centres, and building pipe distribution operations.

(2) Product Structure and Composition

The stack rack mainly consists of the load-bearing base frame, plug-in uprights and load beams. The base frame is welded from profiled steel and forms the load-bearing foundation for the pipes. The uprights are evenly distributed along the length of the frame and provide lateral restraint and protection to keep the pipes from rolling off. The uprights use a plug-in structure that can be quickly assembled and disassembled, making it easy to fold and recover empty racks for storage and transport.

1. Plug-in and demountable: the uprights are connected to the base frame by plug-in joints, so assembly and disassembly are quick and the volume of an empty rack is reduced, lowering storage and transport costs.

2. Stackable in multiple tiers: several tiers can be combined by inserting the uprights into one another, achieving three-dimensional storage and higher space utilisation.

3. Forklift-friendly: the base is 300 mm above the floor, leaving fork entry space so that a whole rack can be moved and stacked with a forklift.

4. Segmented load-bearing: the frame is divided into 1600 mm sections along its length for a stable structure and even load distribution.

(3) Main Technical Parameters

The main technical parameters of the plug-in plastic pipe stack rack (6 m) are given in Table 2.

Table 2 Main technical parameters of the plug-in plastic pipe stack rack (for 6 m pipes)

Parameter Value / Specification Remarks
Product name Plug-in plastic pipe stack rack —
Product application Plastic pipe storage For 6 m long pipes
Suitable pipe length 6000 mm Frame length 5000 mm, pipes overhang 500 mm at each end
Rated load 2000 kg/rack Rated load per rack
Single-tier overall dimensions (L × W × H) 5000 × 1500 × 1300 mm —
Effective load width 1310 mm —
Load surface height 1025 mm From floor to load surface
Base clearance 300 mm Forklift fork entry space
Section spacing 1600 mm 3 sections along the length
Upright height 1300 mm Single-tier upright
Multi-tier stacked total height 2460 mm For combined use
Tier spacing 900 mm Clear height between tiers when stacked
Structural form Plug-in, demountable Uprights can be quickly inserted and removed
Surface treatment Electrostatic powder coating Epoxy powder coating, corrosion and rust resistant

(4) Structure and Dimensions

Based on the 3D model and engineering drawings, this product is described in the sequence “single-tier frame — plug-in structure — front view dimensions — side view dimensions — single-tier loading — multi-tier assembly — full-load result”, as shown in Figures 1 to 7.

Figure 1 is the isometric view of the single-tier stack rack. The single-tier frame measures 5000 mm long, 1500 mm wide and 1300 mm high; the uprights are 1300 mm high, the load surface is 1025 mm above the floor, the base is 300 mm above the floor, and the frame is divided into 1600 mm sections along its length.

derack technical source image

Figure 1 Isometric view of the single-tier stack rack

Figure 2 is the exploded plug-in view of the stack rack, showing the plug-in assembly between the base frame and the uprights. The uprights can be quickly inserted and removed, allowing fast assembly and folding for recovery, and this is the structural basis for combining single-tier racks into multi-tier stacks.

derack technical source image

Figure 2 Exploded plug-in view of the stack rack

Figure 3 is the front view of the stack rack, showing an overall frame length of 5000 mm, a width of 1500 mm, a frame height of 1310 mm and an effective load width of 1310 mm.

derack technical source image

Figure 3 Front view of the stack rack

Figure 4 shows the side view dimensions of the stack rack. The uprights are 1300 mm high, the effective load height is 1025 mm, the base is 300 mm above the floor, and the sections along the length are spaced 1600 mm apart, in 3 sections in total.

derack technical source image

Figure 4 Side view dimensions of the stack rack

Figure 5 shows the single-tier stack rack loaded with plastic pipes. The pipes are laid horizontally and in parallel inside the load frame, with the uprights evenly distributed on both sides to restrain them and prevent rolling.

derack technical source image

Figure 5 Single-tier stack rack loaded with pipes

Figure 6 is the 3D isometric view of the fully assembled stack rack. The tiers are combined by plugging the uprights into one another and the assembly has an overall rectangular layout; the total height is 2460 mm, the tier spacing is 900 mm, the base is 300 mm above the floor, the overall width is 1500 mm and the effective load width is 1310 mm.

derack technical source image

Figure 6 Isometric view of the multi-tier assembled stack rack

Figure 7 shows the multi-tier stack fully loaded with plastic pipes. The tiers are stacked in combination and the pipes are laid out layer by layer, giving a stable overall structure and three-dimensional storage.

derack technical source image

Figure 7 Multi-tier stack loaded with pipes

Figure 8 shows the same product with castors added, providing the pipe transfer function.

derack technical source image

Figure 8 Fitted with castors for push-and-move use, loaded with two different pipe lengths

Figure 9 shows the empty stacking result after castors are fitted to the product.

derack technical source image

Figure 9 The rack can still be stacked when empty

4. Technical Solution for the Plug-in Plastic Pipe Stack Rack (for 4 m Pipes)

(1) Product Overview

The plug-in plastic pipe stack rack (hereinafter “the stack rack”) is warehouse logistics equipment dedicated to the storage and transfer of plastic pipes. The product uses a load-bearing base frame welded from profiled steel and plug-in removable uprights. It can be used on its own, or several tiers can be stacked by inserting the uprights into one another, achieving three-dimensional storage and making full use of warehouse space.

The stack rack is finished with electrostatic powder coating, giving good corrosion and rust resistance and a clean, neat appearance. The rated load is 2000 kg per rack and it is designed to hold plastic pipes 4000 mm long. It is widely used for pipe storage and transfer in plastic pipe manufacturing plants, warehouse and logistics centres, and building pipe distribution operations.

(2) Product Structure and Composition

The stack rack mainly consists of the load-bearing base frame, plug-in uprights and load beams. The base frame is welded from profiled steel and forms the load-bearing foundation for the pipes. The uprights are evenly distributed along the length of the frame and provide lateral restraint and protection to keep the pipes from rolling off. The uprights use a plug-in structure that can be quickly assembled and disassembled, making it easy to fold and recover empty racks for storage and transport.

1. Plug-in and demountable: the uprights are connected to the base frame by plug-in joints, so assembly and disassembly are quick and the volume of an empty rack is reduced, lowering storage and transport costs.

2. Stackable in multiple tiers: several tiers can be combined by inserting the uprights into one another, achieving three-dimensional storage and higher space utilisation.

3. Forklift-friendly: the base is 300 mm above the floor, leaving fork entry space so that a whole rack can be moved and stacked with a forklift.

4. Segmented load-bearing: the frame is divided into 1250 mm sections along its length for a stable structure and even load distribution.

(3) Main Technical Parameters

The main technical parameters of the plug-in plastic pipe stack rack (4 m) are given in Table 3.

Table 3 Main technical parameters of the plug-in plastic pipe stack rack (for 4 m pipes)

Parameter Value / Specification Remarks
Product name Plug-in plastic pipe stack rack —
Product application Plastic pipe storage For 4 m long pipes
Suitable pipe length 4000 mm Frame length 2900 mm, pipes overhang 550 mm at each end
Rated load 2000 kg/rack Rated load per rack
Single-tier overall dimensions (L × W × H) 2900 × 1500 × 1300 mm —
Effective load width 1310 mm —
Load surface height 1025 mm From floor to load surface
Base clearance 300 mm Forklift fork entry space
Section spacing 1250 mm 2 sections along the length
Upright height 1300 mm Single-tier upright
Multi-tier stacked total height 2460 mm For combined use
Tier spacing 900 mm Clear height between tiers when stacked
Structural form Plug-in, demountable Uprights can be quickly inserted and removed
Surface treatment Electrostatic powder coating Epoxy powder coating, corrosion and rust resistant

(4) Structure and Dimensions

Based on the 3D model and engineering drawings, this product is described in the sequence “single-tier frame — plug-in structure — front view dimensions — side view dimensions — single-tier loading — multi-tier assembly — full-load result”, as shown in Figures 8 to 14.

Figure 8 is the isometric view of the single-tier stack rack. The single-tier frame measures 2900 mm long, 1500 mm wide and 1300 mm high; the uprights are 1300 mm high, the load surface is 1025 mm above the floor, the base is 300 mm above the floor, and the frame is divided into 1250 mm sections along its length.

derack technical source image

Figure 8 Isometric view of the single-tier stack rack

Figure 9 is the exploded plug-in view of the stack rack, showing the plug-in assembly between the base frame and the uprights. The uprights can be quickly inserted and removed, allowing fast assembly and folding for recovery, and this is the structural basis for combining single-tier racks into multi-tier stacks.

derack technical source image

Figure 9 Exploded plug-in view of the stack rack

Figure 10 is the front view of the stack rack, showing an overall frame length of 2900 mm, a width of 1500 mm, a frame height of 1310 mm and an effective load width of 1310 mm.

derack technical source image

Figure 10 Front view of the stack rack

Figure 11 shows the side view dimensions of the stack rack. The uprights are 1300 mm high, the effective load height is 1025 mm, the base is 300 mm above the floor, and the sections along the length are spaced 1250 mm apart, in 2 sections in total.

derack technical source image

Figure 11 Side view dimensions of the stack rack

Figure 12 shows the single-tier stack rack loaded with plastic pipes. The pipes are laid horizontally and in parallel inside the load frame, with the uprights evenly distributed on both sides to restrain them and prevent rolling.

derack technical source image

Figure 12 Single-tier stack rack loaded with pipes

Figure 13 is the 3D isometric view of the fully assembled stack rack. The tiers are combined by plugging the uprights into one another and the assembly has an overall rectangular layout; the total height is 2460 mm, the tier spacing is 900 mm, the base is 300 mm above the floor, the overall width is 1500 mm and the effective load width is 1310 mm.

derack technical source image

Figure 13 Isometric view of the multi-tier assembled stack rack

Figure 14 shows the multi-tier stack fully loaded with plastic pipes. The tiers are stacked in combination and the pipes are laid out layer by layer, giving a stable overall structure and three-dimensional storage.

derack technical source image

Figure 14 Multi-tier stack loaded with pipes

5. Technical Solution for the Plug-in Stack Rack

(1) Product Overview

The plug-in stack rack (hereinafter “the stack rack”) is warehouse logistics equipment dedicated to the storage and transfer of coiled plastic hose. The product uses a load-bearing base platform welded from profiled steel and plug-in removable uprights, with a fence added on all four sides that effectively prevents coiled hose from slipping and collapsing when stacked in multiple layers, ensuring storage safety. The rack can be used on its own or combined in multiple tiers for three-dimensional storage, making full use of warehouse space.

The stack rack is finished with electrostatic powder coating, giving good corrosion and rust resistance and a clean, neat appearance. The rated load is 500 kg per rack and it is designed to hold coiled plastic hose. It is widely used for coil storage and transfer in plastic hose manufacturing plants, warehouse and logistics centres, and pipe distribution operations.

(2) Product Structure and Composition

The stack rack mainly consists of the base load platform, plug-in uprights and fence rails. The base platform is welded from profiled steel and forms the load-bearing foundation for the coiled hose. The uprights are evenly distributed around the platform and, together with the horizontal connecting bars, form a fence that restrains stacked coils and prevents them from toppling. The uprights use a plug-in structure that can be quickly assembled and disassembled, making it easy to fold and recover empty racks for storage and transport.

1. Plug-in and demountable: the uprights are connected to the base platform by plug-in joints, so assembly and disassembly are quick and the volume of an empty rack is reduced, lowering storage and transport costs.

2. Fenced to prevent toppling: uprights and horizontal rails on all four sides effectively prevent coiled hose from slipping or tipping when stacked in multiple layers, ensuring storage safety.

3. Stackable in multiple tiers: several tiers can be combined by inserting the uprights into one another, achieving three-dimensional storage and higher space utilisation.

4. Forklift-friendly: support feet under the base leave fork entry space so that a whole rack can be moved and stacked with a forklift.

(3) Main Technical Parameters

The main technical parameters of the plug-in stack rack are given in Table 4.

Table 4 Main technical parameters of the plug-in stack rack

Parameter Value / Specification Remarks
Product name Plug-in stack rack —
Product application Coiled plastic hose storage —
Rated load 500 kg/rack Rated load per rack
Overall dimensions (L × W × H) 1200 × 1360 × 1788 mm —
Base height 295 mm —
Support foot height 110 mm Forklift fork entry space
Structural form Plug-in, demountable Uprights can be quickly inserted and removed
Protective structure Fence on all four sides Prevents stacked hose from toppling
Surface treatment Electrostatic powder coating Corrosion and rust resistant

(4) Structure and Dimensions

Based on the 3D model and engineering drawings, this product is described in the sequence “single-tier frame — structure and dimensions — top view — side view — hose loading — multi-tier assembly — full-load result”, as shown in Figures 15 to 21.

Figure 15 is the isometric view of the single-tier stack rack structure. The single-tier rack consists of the base load platform, plug-in uprights and fence rails; the overall dimensions are 1200 mm long, 1360 mm wide and 1788 mm high, the base height is 295 mm and the support feet are 110 mm high.

derack technical source image

Figure 15 Isometric view of the single-tier stack rack structure

Figure 16 is the isometric view showing the structure and dimensions of the stack rack, presenting the composition of the base load platform, the four plug-in uprights and the multiple tiers of horizontal connecting rails. The uprights can be quickly inserted and removed, allowing fast assembly and folding for recovery, and this is the structural basis for combining single-tier racks into multi-tier stacks.

derack technical source image

Figure 16 Isometric view of the stack rack structure and dimensions

Figure 17 is the top view of the stack rack, showing the base load platform 1200 mm long and 1360 mm wide, with coiled plastic hose arranged in a 2 × 2 matrix on the platform and the upright fence around it providing restraint.

derack technical source image

Figure 17 Top view of the stack rack

Figure 18 shows the side view dimensions of the stack rack. The overall height is 1788 mm, the base height is 295 mm and the support feet are 110 mm high; the fence on all four sides restrains stacked hose and prevents toppling.

derack technical source image

Figure 18 Side view dimensions of the stack rack

Figure 19 shows the stack rack loaded with coiled plastic hose. The coils are stacked on the load platform and restrained by the upright fence on all four sides, preventing the stack from slipping or tipping.

derack technical source image

Figure 19 Stack rack loaded with coiled hose

Figure 20 shows the multi-tier combined structure of the stack rack. The tiers are combined by plugging the uprights into one another and the coiled hose is laid out layer by layer, achieving three-dimensional storage and higher warehouse space utilisation.

derack technical source image

Figure 20 Multi-tier combined structure of the stack rack

Figure 21 is the multi-tier stack loaded with coiled plastic hose. Multiple rack units are arranged side by side and stacked in several tiers in a neat overall layout, enabling large-volume three-dimensional storage of hose.

derack technical source image

Figure 21 Multi-tier stack loaded result

6. Manufacturing Process and Surface Treatment

(1) Manufacturing Process

The main bodies of all products in the series are cut and welded from profiled steel. The welds are sound and the structure is stable, meeting the load-bearing and service requirements for the relevant rated loads.

(2) Surface Treatment

The rack surface is treated by electrostatic powder coating, including processes such as surface derusting, cleaning, phosphating, electrostatic powder spraying and high-temperature curing. The coating has strong adhesion, is even and neat, and offers good corrosion and rust resistance for long-term use in warehouse environments.

7. Use and Maintenance

1. Handling: insert the forklift forks into the fork entry space at the base and move or stack the whole rack; distribute the load evenly when loading material and avoid eccentric loading.

2. Stacking: when stacking multiple tiers, make sure the upper and lower racks are fully engaged and placed level, and strictly control the total stacking height to prevent tipping.

3. Routine inspection: regularly check the upright joints, welds and coating; deal with any looseness, deformation or corrosion promptly to keep use safe.

4. Storage environment: use in a ventilated, dry warehouse environment and avoid long-term exposure to acid, alkali or damp conditions to extend the service life of the rack.

8. Packing and Container Loading Plan

(1) Racks 5 m long: 22 sets per 40 ft high-cube container; 10 sets per 20 ft container

(2) Racks 2.9 m long: 44 sets per 40 ft high-cube container; 20 sets per 20 ft container

(3) Racks 5 m long (with castors): 22 sets per 40 ft high-cube container; 10 sets per 20 ft container

(4) 1200 × 1200 stack racks: 100 sets per 40 ft high-cube container; 40 sets per 20 ft container

Reference styles for similar products and packing:

derack technical source image
derack technical source image
derack technical source image

Performance test 1

derack technical source image

Performance test 2

derack technical source image

Performance test 3

The product is packed with stretch film plus strapping. This method adds no extra packing cost, but it cannot fully guarantee against surface coating damage caused by knock contact between products in transit. A more reliable wooden crate packing is also available, with the crate cost calculated into the product cost strictly according to our purchasing price. (Wooden crate price = CNY 90/m²)

Send us your pipe diameters, 6 m and 4 m lengths, coil weights and available floor area. We will confirm the rack configuration, castor requirements, stacking height limit and container loading quantities for your project. Send Your Pipe Storage Requirements

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.