Vertical Storage Rack for 4000 mm Aluminum Tubes: Container-Fitted Technical Solution
derack
Technical solution for a 2900 × 1140 × 850 mm vertical storage rack storing 4000 mm aluminum tubes: container-fitted dimensions, three-tier stacking at 2478 mm, 1100 kg per rack, material configuration and loading plan.
Vertical Storage Rack for 4000 mm Aluminum Tubes: Container-Fitted Technical Solution
A vertical storage rack system sized 2900 × 1140 × 850 mm for aluminum alloy tubes of Φ19–Φ26 mm and 4000 mm length. Two racks per row fit a 20-foot container width, two rows fit its length, and three-tier stacking reaches 2478 mm with about 1100 kg of tube per rack. Includes load-based material configuration, packaging and container loading plan.

Customer Requirement Analysis
The customer needs to transport and store aluminum alloy tubes. The tube specifications are listed below.

Requirement Parameter Table
| No. | Item | Parameter | Remarks |
|---|---|---|---|
| 1 | Length of stored tube | 4000 mm | |
| 2 | Density of stored tube | 2700 kg/m³ | |
| 3 | Specification of stored tube | Φ22×1.3 Φ26×1.3 Φ19×1.2 | |
| 4 | Weight per piece | 0.913 kg, 1.089 kg, 0.725 kg | Length 4000 mm |
| 5 | Surface treatment | Electrostatic powder coating |
Technical Solution Description
We determined the basic frame dimensions from the length and width of the container.
First, to make the best use of the container storage space, we recommend a frame width of 1140 mm, so that two rows of storage racks can be placed in each container.
The length is then set at 2900 mm, which likewise fits the container length best. For example, a 20-foot container is 5900 mm long, so exactly two rows of storage racks can be placed in it.
To store 4000 mm tubes, a rack length of 2900 mm is also appropriate: once the aluminum tubes are placed on the rack, 550 mm protrudes on each side, which makes it convenient to attach lifting slings.
This fixes the storage length and width at 2900 mm and 1140 mm respectively.
For the height, we calculated on the basis of the 2500 mm road transport height limit. If two-tier stacking is used to reach this height, a single rack would be about 1250 mm high. At that size the total weight of the aluminum tubes stored would be about 1700 kg. The rack can carry this weight, but we are somewhat concerned that the tube wall at the very bottom is too thin and may deform easily, which would affect the quality of the stored product.
For this reason, we recommend a height of 2500/3 ≈ 830 mm per rack; we take a design height of 850 mm. After stacking, the feet consume part of the height, so the total height will not exceed 2500 mm. The rack material is then configured according to these design conditions.
Overall dimensions of the storage rack: length × width × height = 2900 × 1140 × 850 mm
Based on the dimensions defined above, we have a preliminary solution for this tube rack, as shown below.




The rack has a six-upright structure with independent fork pockets. The uprights and the base use a plug-in structure: insert them for use and pull them out when not in use, which saves storage and transport space.
Taking Φ19×1.2 tube as an example, let us look at the effect of a fully loaded rack.

Rendering of the three-tier stacking condition

After three-tier stacking, the total height is 2478 mm. Calculated on this storage basis, the tube weight stored in a single rack is about 1100 kg.
Based on this load, we provide the most suitable material configuration, as shown below.


The total weight of the rack is 118 kg.
Packaging and Loading Plan
A 20-foot container holds 36 units; a 40-foot high cube holds 80 units.
Packaging reference:


The product is packed with stretch film plus strapping. This method incurs no extra packaging cost, but it cannot fully prevent surface paint film damage caused by collisions between products during transport. A more reliable wooden crate packing is also available; the wooden crate is calculated into the product cost at our purchase price (wooden crate price = RMB 90 per m²).
Items for Further Discussion
We have prepared a preliminary solution design for you. You may also have better ideas and suggestions. We can hold an online meeting to discuss how they can work together and whether further adjustment is needed. We look forward to discussing this with you.
Send us your tube diameters, lengths and container type. We will confirm the frame dimensions, stacking height and load capacity for your project, and adjust the material configuration accordingly. Send project details