🏭 Steelpallet · Factory Direct · OEM Available

Window and Door Transport Stacking: Technical Solution for Vertical Transport Racks and Fenced Flat Steel Pallets
Agrack

Technical solution for vertically transported window and door goods and fenced flat steel pallets for long building materials: fork entry channels, rubber protection, folding and stacking.

100%
Steel Quality
Heavy
Duty Rating
Custom
Sizes Built
Window and Door Transport Stacking: Technical Solution for Vertical Transport Racks and Fenced Flat Steel Pallets
Technical Solution

Window and Door Transport Stacking: Technical Solution for Vertical Transport Racks and Fenced Flat Steel Pallets

A technical solution for a customer requirement covering vertically transported window and door goods, horizontal formwork storage on a pallet with a 305 mm perimeter fence, and flat steel pallets with a rear retaining wall for long building materials. Fork entry channels, rubber protection, folding and stacking are described, together with the open questions on cargo size, load capacity and forklift fork parameters.

Request a quotation for this solution

Flat steel pallet with rear retaining wall for long building materials, customer reference image

Customer Requirement Analysis:

Window and door goods are to be transported vertically; the cargo dimensions will be provided later and are currently unknown.

Formwork is to be stored horizontally on a pallet; the pallet is required to have a perimeter fence, with a fence height of 1 ft (305 mm).

We are looking for a flat steel pallet with a small wall or bar at the rear, in order to prevent long building materials from sliding off when they are handled by forklift.

We would like a quotation for the following products

3 pcs – 8 ft x 4 ft (2438 x 1219 mm)

10 pcs – 12 ft x 4 ft (3658 x 1219 mm)

5 pcs – 16 ft x 4 ft (4877 x 1219 mm)

10 pcs – 20 ft x 4 ft (6096 x 1219 mm)

If possible, the pallet base should be 6 in (152 mm) high and include forklift channels.

Flat steel pallet with rear retaining wall for long building materials, customer reference image
Steel pallet base with forklift slots and perimeter fence, customer requirement reference image

Technical Solution Description

This rack is recommended for storing window and door goods. The rack dimensions need to be designed according to the cargo dimensions; please provide the cargo dimensions and the required load capacity of the rack.

Steel rack recommended for vertical storage and transport of window and door goods

This product consists of a base, left and right side gates and a rear gate. The base is fitted with forklift channels allowing four-way entry, and the channel dimensions are customized to customer requirements.

Rack base with side doors, rear door and four-way forklift entry channels

The base is fitted with rope tie rings, which can be used to strap and secure the goods after loading.

Pallet base with rope tie rings for securing loads after loading

Rubber strips are fitted on all inner surfaces of the rack where they contact the goods, effectively protecting the cargo.

Rubber strips on inner contact surfaces of the rack to protect goods
Rubber strip padding on the inner side of the steel rack uprights
Rubber strip protection detail at the rack contact surface

Collapsible structure; empty storage or transport takes up less space

Collapsible rack structure for space-saving empty storage and transport
Folded steel rack with compressed volume for return transport

Can be used in a stacked configuration

Stackable steel rack for multi-tier stacking use

A mesh fence is welded around the pallet; the pallet height is 153 mm and the fence height is 305 mm. Please advise the parameters of the forklift forks used (fork centre distance, fork thickness, width, length). Does the image below show the effect the customer wants? Only two sizes can be produced, 8 ft x 4 ft and 12 ft x 4 ft; for longer sizes the overhang on both sides is too long when the pallet is moved by forklift.

Steel pallet with welded perimeter mesh fence, 153 mm pallet height and 305 mm fence height
Welded mesh fence around steel pallet base for horizontal template storage

Finally, thank you for reading this far. With regard to the product description above, please consider whether it can meet your operating requirements, and we would appreciate your answers to a few questions.

Please advise the dimensions of the windows and doors and the required load capacity of the rack?

What are the parameters of the forklift forks used?

In the process of placing the boards horizontally onto the pallet, is this done manually or with a forklift?

Do you have any other questions or requirements? We will do our best to meet your needs and look forward to our next communication.

Send us your cargo dimensions, the required load capacity and your forklift fork parameters, and we will confirm the rack size, fork entry channels, fence height and pallet base for your project. Contact us

Request Pricing Details




    Request Quote List

    Your quote request list is empty.

    Request Technical Drawings

    Provide your contact details to request the drawing. If a file is unavailable, our team will contact you.