Motorcycle Pallet for 96-Inch Racking Storage
Mtrack
Custom motorcycle pallet engineered for 96 in × 42 in racking: wheel channels, independent fork entry, U-hook strap points, 78 kg pallet, optional plug-in posts for stacking.
Motorcycle Pallet for 96-Inch Racking Storage
A custom motorcycle pallet engineered to carry a motorcycle and sit on the customer's existing 96 in wide × 42 in deep racking, with dedicated wheel channels, independent fork entry, U-shaped strap hooks, and optional plug-in post sets for stacking.

Customer Requirement Analysis:
The customer needs a pallet on which a motorcycle is loaded, and the loaded pallet is then placed on their existing racking.
Refer to the drawing below for the motorcycle dimensions.
The racking width is 96 inches and the depth is 42 inches.

Technical Solution Description

Overall Product Appearance and Basic Dimensions

The blue recessed channels are the positions where the two motorcycle wheels are placed.

It has independent fork entry channels, which can prevent the fork tines from striking the motorcycle.

These U-shaped hooks make the straps that secure the motorcycle easier to install.

These two steel tubes are specially thickened so that the pallet can be placed on the racking with confidence.

This is the material specification of the pallet; the pallet weighs 78 kg.


This is the effect of the pallet placed on the racking.
This pallet has another way of use: stacking together with its own post sets.

This is the motorcycle pallet fitted with the post sets; the total weight of the pallet plus two post sets is 108 kg.

This is its stacking effect. These post sets are of a plug-in structure, so they can be pulled out and stored separately when not needed.

So the same effect can be achieved whether or not the post sets are configured; the pallet can be stacked when empty.
Packing and Container Loading Plan
When transporting by the stacking method above, because the 2400 dimension exceeds the width of the container, the pallets can only be loaded along the length direction of the container, which wastes a lot of space. It is therefore recommended to adjust the 2400 mm dimension to 2300 mm; the motorcycle wheels may protrude a little beyond the pallet range, and the shipping quantity will increase significantly: 70 units before the change and 140 units after the change.
Packing reference style:



The product is packed with bubble film plus strapping. This method does not generate extra packing costs, but it cannot fully ensure that the surface paint film is not damaged by collisions between products during transport. A more reliable wooden crate packing can also be selected, and the packing crate is fully calculated into the product cost at our purchase price. (Wooden crate price = CNY 90/m²)
Implementation Plan and Schedule
The salesperson can provide this content when the customer has specific quantity and production schedule requirements.
After-sales Service Plan
None
Risk Assessment
The product must not be exposed to rain for a long time; long-term rain exposure will cause water to accumulate inside the tubes, which leads to internal rust and rusty water flowing out, affecting the product appearance.
The fork entry openings are used to conveniently locate the center position; do not fork violently, as this will deform the fork entry openings.
Regularly check whether the bolts of the folding door are fully tightened, to avoid bolts falling off due to vibration and causing danger.
During static stacking, the operator must confirm that the feet of the upper frame have indeed fully landed on the posts of the lower frame before withdrawing. Avoid the risk of stack collapse caused by improper stacking.
Send us your motorcycle dimensions, racking width and depth, and required shipping quantity. Our engineering team will confirm the pallet layout, fork entry, strap points and stacking configuration for your operation. Contact Steel Pallet Engineering