Motorcycle Pallet Rack for Road Glide Container Shipping
Mtrack
500 kg steel motorcycle pallet rack sized for a Harley-Davidson Road Glide: 2550 × 1050 × 1316 mm, 93 kg, plug-in posts, 12-high stacking, 72 bases per 40 ft HC.
Motorcycle Pallet Rack for Road Glide Container Shipping
A 500 kg steel motorcycle pallet rack engineered from the 2024 Harley-Davidson Road Glide footprint: 2550 × 1050 × 1316 mm outer size, 93 kg self weight, plug-in detachable posts, 12-high stacking at 2490 mm and 72 bases per 40 ft high-cube container.

Customer Requirement Analysis:
Parameters Provided by the Customer
The dimensional parameters of the 2024 Harley-Davidson Road Glide are as follows:
Overall length: 2410 mm (94.9 in)
Wheelbase: 1625 mm (64.0 in)
Seat height
Unladen: 720 mm (28.3 in)
Laden: 676 mm (26.6 in)
Minimum ground clearance: 145 mm (5.7 in)
Rake angle: 26°
Trail: 173 mm (6.8 in)
Overall width: 945 mm (37.2 in)
Overall height: 1315 mm (51.8 in)
Tyre specification
Front wheel: 130/60B19 M/C 61H
From the information above we derived the design parameters of the motorcycle rack
Length × width: 2410 × 1050;
Height of a single rack ≥ 1315 mm
Design load of a single rack: 500 kg
The motorcycle has to be pushed into the rack, secured, and then loaded into the container
Technical Solution Description
The preliminary design form of the motorcycle rack is shown in the figure below

The outer dimensions of the rack are 2550 × 1050 × 1316 mm, the self weight is 93 kg, and it carries a maximum motorcycle weight of 500 kg

It accepts a maximum motorcycle length of 2410 mm and a width of 1000 mm

The fork entry pocket measures 200 × 69 mm with a centre distance of 820 mm (620 + 200), suitable for a motorcycle height of 1315 mm

Three-dimensional effect of the stacked units

The stacking posts use a plug-in structure and can be separated from the base

Both sides of the rack are fitted with hooks for ropes and straps, so the motorcycle can be tied down onto the rack, as shown below


Twelve motorcycle racks stacked together reach a total height of 2490 mm
Packing and Container Loading Plan
Twelve bases packed together measure 2580 × 1100 × 2500 mm in total; a 40 ft high-cube container can hold 72 units
Three motorcycle racks packed together measure 2580 × 1100 × 900 mm in total
Packing reference style:



The product is packed with stretch film plus strapping. This method does not create additional packing cost, but it cannot fully guarantee the surface paint film against damage from collisions between products during transport. A more reliable wooden crate packing can also be selected, and the crate cost is calculated into the product cost according to our purchasing price.
Implementation Plan and Lead Time
This item is provided once the customer confirms the specific quantity and the required production schedule
After-Sales Service Plan
None
Risk Assessment
Forklift entry and lifting must be carried out at a steady speed; do not fork the product roughly, so that the product is not damaged and its use is not affected.
Regularly check the base, posts and other components for bending, deformation or cracked welds, so that problems with rack components do not create a hazard.
During static stacking, the operator must confirm that the feet of the upper rack are fully seated on the posts of the lower rack before releasing the load, avoiding the danger of a stack collapse caused by improper stacking.
Send us the motorcycle model, outer dimensions and container plan. We will confirm rack size, load rating, stacking height and packing layout against your shipment, and quote the steel pallet rack accordingly. Talk to the Steel Pallet team