Push back rek voor lange buizen

Stop burying your high-value stainless steel tubes under mountains of inventory.

For Steel Service Centers and Tube Manufacturers, “digging” for the right heat number with a forklift isn’t just slow—it destroys your surface finish and kills your laser cutter’s uptime. Switch to a 100% accessible, crane-operated system.

Praat met een expert

The End of “Honeycombing” in Sanitary Tube Storage

In the hygienic stainless steel industry—whether you are supplying dairy, pharmaceutical, or semiconductor sectors—the surface integrity of your product is non-negotiable. A scratch on a polished 316L tube isn’t just a defect; it’s scrap. Yet, many facilities still rely on floor stacking or static cantilever racks that force operators into a high-risk game of “pick-up sticks” with heavy-duty forklifts.

If your operation resembles the workflow of high-precision manufacturers like GHWA, you know that standard storage methods create two massive problems: Surface Damage during retrieval and Space Waste due to wide forklift aisles. The solution lies in changing the geometry of storage: moving from static shelves to a dynamic Push back rek voor lange buizen (technically known as Telescopic or Crank-out Cantilever).

Why Overhead Cranes Beat Forklifts for Tube Bundles

Het bepalende kenmerk van dit systeem is de 100% uitschuifcapaciteitUnlike standard racks where a forklift must drive in the structure (risking collision) or push material aside, our telescopic arms roll out completely into the aisle.

This allows your facility to utilize bovenloopkranen (bridge cranes) for all loading and unloading.

• Zero Side-Impact: Cranes lift vertically using nylon slings. There is no metal-on-metal friction from forks sliding under bundles.
• Selectieve toegang: Need a specific bundle of OD 2.0″ tubes buried at the bottom? Simply crank out that specific level. No need to move the top three layers first.
• Dense Storage: Because you don’t need a 15-foot turning radius for a heavy forklift, aisle widths can be reduced by up to 50%, doubling your storage density per square foot.

Electric telescopic racks allow for single-operator overhead crane access, essential for heavy stainless bundles.

Feeding the Beast: Optimizing Laser and Saw Uptime

In a high-mix, low-volume production environment (typical of OEM component manufacturing), your laser cutters and band saws are the heartbeat of the factory. If a machine is idle for 20 minutes while an operator hunts for the correct raw material, you are bleeding money.

Door een Telescopische Console-rek directly adjacent to your processing equipment, you create a “Point of Use” storage buffer.

• Retrieval Time: Reduced from 15-25 minutes (forklift digging) to 2-3 minutes (crank and hoist).
• Inventory Visibility: Each drawer is clearly visible. Operators can verify stock levels of specific grades (e.g., 304 vs. 316L) instantly without moving materials.
• Ergonomie: Whether using a manual crank (geared for easy movement) or an electric drive, a single operator can handle loads up to 5 tons per level safely.

Preserving Ra Roughness Standards

For industries governed by ASME BPE or 3-A Sanitary Standards, the surface roughness (Ra) of the tube is critical. Standard steel racks are enemies of polished stainless steel.

Our systems are engineered with this in mind. Arms can be outfitted with UHMW (Ultra-High Molecular Weight Polyethylene) liners or other non-marring materials. This ensures that your high-purity tubes never touch carbon steel, preventing both physical scratches and potential iron contamination (rust spots) that would fail QC inspections.

Dividers and protective linings ensure distinct batches of hygienic tubes remain separated and damage-free.

System Specifications for Heavy Tube Profiles

We configure these racks based on your specific bundle lengths (20ft/6m is standard) and weights.

Installatie: Verankering voor Stabiliteit

In tegenstelling tot lichtgewicht stellingen, werken deze systemen met dynamische krachten. De basis is geconstrueerd uit massieve H-balken om het koppel tegen te gaan wanneer een volledig beladen lade (potentieel 6.000 lbs) wordt uitgetrokken.

Installatie vereist een gewapende betonvloer. Onze teams gebruiken zware chemische of mechanische ankers om de unit te bevestigen, zodat zelfs bij volledige uitschuiving het zwaartepunt binnen de veilige zone blijft. Dit is constructietechniek, niet zomaar "stellingen".

Een correcte verankering aan de vloer is cruciaal voor de stabiliteit van telescopische cantileversystemen.