Inverted Rerack Stack Rack for Cold Rooms Without Wall Drilling
Use an inverted Rerack stack rack in an indoor cold room without drilling the insulation wall. Learn the connected two-rack option, project-based 100 mm forklift gap, and powder-coating limits.
Store frozen goods without drilling the insulation wall
An inverted Rerack uses its steel frame and stacking geometry to create a freestanding storage position inside the cold room. It is placed on the floor, so the layout can be installed without anchors through the insulated wall.
This is a cold-room variant, not a universal fixed-size SKU. The design is checked against the pallet footprint, loaded height, forklift entry, stacking height and floor conditions. In the 14306 project reference, the pallet was 1200 × 1200 mm, the loaded pallet height was 1700 mm, the reference load was 500 kg per pallet, and the room height was about 4 m for two-level storage. These figures are project values for design discussion, not a general rating for every Rerack.
- No wall drilling: the rack is a floor-standing storage frame rather than a wall-fixed system, helping protect the insulation envelope.
- Two-rack connection option: a connecting pallet with ears can link two inverted racks into one wider, more stable group.
- Forklift-compatible empty gap: a 100 mm nesting gap is a project reference for accommodating fork thickness; it must be checked against the actual truck.
- Indoor cold-room finish: electrostatic powder coating is a cost-conscious finish for enclosed cold storage; it is not an outdoor, rain-exposed maintenance-free specification.
Compare the cold-room options before specifying
INVERTED RERACK
Freestanding cold-room stacking
Use the inverted steel stack rack when you need vertical pallet storage without drilling into an insulated wall and want the layout to remain floor-based and changeable.
CONNECTED PAIR
Two racks linked by connecting pallet ears
Where a wider, more stable group is useful, the connecting pallet sits between two racks and its ears engage the rack structure. This can add stability without specifying a heavier standalone frame for every position.
ALTERNATIVE REVIEW
When another rack logic may fit better
Choose a fixed pallet-rack system when the layout is permanent and the building can accept an engineered anchoring plan. Consider demountable post pallets when dismantling the posts, reusable bases or a different handling workflow matters more.
Protect the room envelope while using vertical capacity
Floor-based, not wall-fixed
The inverted Rerack transfers the storage load through its steel frame to the floor. That is why the concept does not require drilling the insulation wall. The floor, rack spacing, stacking height and operating clearances still need site confirmation.
Connection pallet controls the build
In project 14306, a connecting pallet with ears joined two racks. The paired arrangement uses a connection component to improve group stability and can control cost compared with making every rack unnecessarily heavier. The exact ear engagement and load path must follow the approved drawing.
100 mm is a handling reference
The 100 mm empty nesting gap is intended to accommodate forklift fork thickness in a project design. It is not a universal clearance. Confirm fork thickness, entry direction, nesting order and the safe lifting method before production.
Powder coating fits enclosed use
For an indoor cold room that does not expose the rack to rain, electrostatic powder coating is the stated cost-conscious surface route. Long-term rain exposure can allow water into tube sections and cause internal corrosion, so this configuration should not be presented as an outdoor maintenance-free rack.
Specify the rack around the way your room operates
Map the pallet and load
Send pallet length and width, total loaded height, unit weight, pallet support-leg position and the number of storage levels.
Check the room and floor
Confirm clear height, door path, floor condition, aisle width, insulation-wall locations and whether the racks stay inside the cold room.
Choose the connection logic
Compare single inverted racks with two-rack groups using a connecting pallet and ears. The choice depends on stability, layout and cost—not on a universal standard accessory.
Approve handling and finish
Verify the forklift fork thickness against the nesting gap, define the stacking sequence and confirm electrostatic powder coating is suitable for the enclosed indoor environment.
Answers before you put stack racks in a freezer room
Can an inverted Rerack be used without drilling the insulation wall?
Yes, where the site floor and operating conditions support a floor-standing design. The rack is not anchored through the insulated wall. It still requires a project check of floor bearing, rack geometry, clearances, stacking height and forklift operation.
How do the connecting pallet and ears join two racks?
In the 14306 reference, the green connecting pallet is positioned between two inverted racks and includes ears that engage the rack structures. This creates a connected pair, improving overall stability while avoiding an automatic need for a heavier rack at every position. The final connection detail must be taken from the approved project drawing.
Is the 100 mm empty gap standard for every stack rack?
No. It is a project reference used to accommodate forklift fork thickness and the selected nesting arrangement. Your fork dimensions, entry direction and safe clearance must be confirmed before the rack is released for production.
Is electrostatic powder coating enough in a cold room?
For the enclosed indoor cold-room use described in project 14306, electrostatic powder coating was selected as the more economical finish. That does not make the rack suitable for continuous rain, washdown or outdoor exposure. Those conditions need a separate surface-treatment review.
Does the 14306 load mean every Rerack carries 500 kg?
No. The 1200 × 1200 mm pallet, 500 kg reference load, 1700 mm loaded height and two-level arrangement are project values. Rerack is designed around the actual pallet, load, stacking level and handling conditions; they must not be reused as a universal rating.
When is this cold-room Rerack not the right choice?
It may not fit if the rack must remain outdoors, face long-term rain or washdown, use a permanently fixed building layout, or support a handling process that conflicts with its stacking and forklift clearances. A fixed pallet-rack or demountable post-pallet design may be more appropriate after comparison.
Explore the Rerack stack rack overview · Read the 14306 cold-room case · Read the cold-room stack-rack guide
B2B Racking Structural Engineering Calculator
Input your structural guidelines below. Our math system calculates material deflection, stress bounds, and recommends optimal profiles.
Click Compute to calculate stress factors and display structural drawing recommendations.